B&C DE250TN 1" Titanium Compression Driver 8-Ohm 2/3-Bolt w/ Horn LA-WG10

120 W Continuous power handling 1.7 in (44 mm) Voice coil diameter Polyimide Diaphragm material 1.0 in (25 mm) Throat diameter     Last viewed products DE250 Features 120 W continuous program power capacity 1' horn throat diameter 44 mm (1.7 in) aluminium voice coil Polyimide diaphragm 1000 - 18000 Hz response 108.5 dB sensitivity Specifications Specifications1 Throat Diameter 25 mm (1.0 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Nominal Power Handling2 60 W Continuous Power Handling3 120 W Sensitivity4 108.5 dB Frequency Range 1.0 - 18.0 kHz Recommended Crossover5 1.6 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Polyimide Flux Density 1.85 T Magnet Material Ferrite B&C DE250, 8 Ohm,fe Hf Driver DE250-8. Condition is New. Shipped with USPS First Class.   Driver mounted on B&C ME 45 horn. 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. Power on Continuous Program is defined as 3 dB greater than the Nominal rating. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance. 12 dB/oct. or higher slope high-pass filter.   nches SPECIFICATIONS1 Throat Diameter Nominal Impedance Minimum Impedance Nominal Power Handling2 Continuous Power Handling3 Sensitivity4 Frequency Range Recommended Crossover5 Voice Coil Diameter Winding Material Inductance Diaphragm Material Flux Density Magnet Material MOUNTING AND SHIPPING INFO Two M6 holes 180° on 76 mm (3 in) diameter Three M6 holes 120° on 57 mm (2.2 in) diameter SERVICE KIT 25 mm (1.0 in) 8Ω 7.8 Ω 60 W 120 W 108.5 dB 1.0 - 18.0 kHz 1.6 kHz 44 mm (1.7 in) Aluminium 0.11 mH Polyimide 1.85 T Ferrite Overall Diameter Depth Net Weight Shipping Units Shipping Weight Shipping Box 120 mm (4.7 in) 62 mm (2.4 in) 2.1 kg (4.6 lb) 4 8.85 kg (19.51 lb) 265x135x170 mm (10.43x5.31x6.69 in) Specifications 3x M6 Mounting Studs with bolts and washers included 1. Driver mounted on B&C ME 45 horn. 2. 2 hour test made with continuous pink noise signal within the range from the recommended crossover frequency to 20 kHz. Power calculated on rated minimum impedance. 3. Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4. Applied RMS Voltage is set to 2.83 V for 8 ohms Nominal Impedance. 5. 12 dB/oct. or higher slope high-pass filter. B&C Speakers s.