SX1303 LoRa Gateway module

Description This is  a LoRa gateway module with industrial standard mini PCI express form factor based on the SX1303 chipset. This mPCIe module can be used in any embedded platform offering a free mPCIe slot with SPI connectivity and capable of providing enough power for the module, enables low-power wide-area communication capabilities to your new gateway design or existing industrial routers/computer. Complete and cost-efficient LoRa gateway solution offering up to eight(8) programmable Lora parallel demodulation channels. Allowing it to receive up to eight LoRa® modulated packets simultaneously. It targets Internet-of-Things (IoT) applications, covering up to 500 nodes per square kilometer in an environment with moderate interference.    Features Compliance with LoRaWAN 1.0.2 Multichannel: Eight (8) programmable Lora parallel demodulation channels. mPCIe form factor based on SPI host interface Compact mini PCI express form factor TYP. 50.95*30.0*10.5mm (W*L*H) The voltage of Mini PCI-e is 3.3V, compatible with 3G/LTE mPCIe card TX Power up to 27dBm, Rx sensitivity down to -139dBm@SF12,BW 125kHz.   Specifications Parameters Description Modulation type ISM Band LoRa® LoRa chipset SX1303 Multi-channel Eight (8) uplink, one (1) down link Package Mini PCI express  Host interface SPI Frequency 863~870MHZ, 902~928MHZ(Opt.) Receiving sensitivity -139dBm Tx power +27dBm Supply voltage +3.3V Power consumption Tx (Max)<415mA,Rx <40mA, standby 7.5mA Operating temperature -40～+85℃ (industrial grade) Operating humidity 10%～90%, no-condensing Dimensions TYP. 50.95*30*10.5mm (W*L*H) ESD (Human Body Model)   JEDEC JS-001 Standard ±1kV, Class 2  Pinout No. Mini PCIEx Pin Rev 2.0 Type Description 1 NC N/A No Connection.Reserved for SX1261_BUSY 2 +3.3V Power input 3.3V DC supply. 3 NC N/A No connection.Reserved for SX1261_DIO1 4 GND GND Ground 5 NC N/A No connection.Reserved for SX1261_DIO2 6 1.5V I/O Connect to SX1302’s GPIO[6] 7 NC N/A No connection.Reserved for SX1261_NSS 8 NC N/A No connection 9 GND GND Ground 10 NC N/A No connection 11 NC N/A No connection.Reserved for SX1261_NRESET 12 NC N/A No connection 13 MCU_NRESET DI No connection.Reserved for future applications 14 NC N/A No connection 15 GND GND Ground 16 NC N/A No connection.Reserved for POWER_EN 17 NC N/A No connection 18 GND GND Ground 19 1PPS DO GPS time pulse input, Leave open if  20 NC N/A No connection 21 GND GND Ground 22 SX1302-Reset DI Active high>=100ns for SX1302 Reset input 23 NC N/A No connection 24 +3.3V PI 3.3V DC supply 25 NC N/A No connection 26 GND GND Ground 27 GND GND Ground 28 NC N/A No connection 29 GND GND Ground 30 NC N/A No connection.Reserved for SMB_CLK  31 NC        N/A No connection 32 NC N/A No connection.Reserved for SMB_DATA 33 NC N/A No connection 34 GND GND Ground 35 GND GND Ground 36 NC N/A No connection.Reserved for USB_DM 37 GND GND Ground 38 NC N/A No connection.Reserved for USB_DP 39 +3.3V PI 3.3DC supply 40 GND GND Ground 41 +3.3V PI 3.3V DC supply 42 NC N/A No connection 43 GND GND Ground 44 NC N/A No connection 45 HOST_SCK I/O Host SPI CLK 46 NC N/A No Connection 47 HOST_MISO I/O Host SPI MISO 48 NC N/A Not connected 49 HOST_MOSI I/O Host SPI MISI 50 GND N/A Ground 51 HOST_CSN I/O Host SPI CS 52 +3.3V PI 3.3V DC supply