Magnimage Mach Series LED Display Controller FW16-C All-in-1 LED Video Processor

The FW16-C-D/H(MH80-D/H) is an all-in-one video controller developed by Magnimage for the rental market. With a complete video image input interface, which FW16-C-D including 1 × HDMI2.0, 1 × DP1.2, 4 × DVI, 1 × 12GSDI, FW16-C-H including 2 × HDMI2.0, 2 × DP1.2, 2 × DVI, 1 × 12GSDI; Output support for 16-way Gigabit Ethernet port, 4-way 10G fiber input / output, 1 × HDMI2.0 loop-out, 1 × HDMI monitoring; the widest horizontal resolution up to 16 HDMI2.0 ring out, 1 × HDMI monitoring; the widest horizontal resolution of a single machine up to 16380, the highest vertical up to 7680.The FW16-C-D/H(MH80-D/H) has three working modes, which are categorized into Mach mode, conventional mode and photoelectric conversion mode. Under Mach mode, the single network port carries 2.2 million pixels, and the whole machine has 8 main network ports and 8 standby ports, and the whole machine carries a maximum of 17.6 million pixels; under conventional mode, the single network port carries 980,000 pixels, and the whole machine has 16 network port outputs, and the whole machine carries a maximum of 15.68 million pixels; the photoelectric conversion mode is used for the equipment to do optical port backup.The FW16-C-D/H(MH80-D/H) supports quick screen pointing function, no need for computer software to configure screen connection, which greatly simplifies the on-site debugging steps.Supports quick screen pointing, no need for computer software to configure screen connection.Support single network port backup and multi-machine network port backup.Four-layer display, full-screen roaming at willSupport single-machine multi-channel input splicing and multi-machine splicing.Support single-port 4K * 2K / 60Hz (HDMI2.0) or 8K * 1K (DP1.2) inputSupport 16-channel Gigabit Ethernet port outputSupport HDR 10/HLGSupport template saving and retrievalSupport receiver card serial number calibrationSupport single input backupSupport multi-computer group backup, can be a full set of the main system at the same time switch to the backup systemSupport optical port input/output and optical port backup.Supports seamless switching of input signals and presets.4K@60Hz RGB 4:4:4 processingSupport layer fast templatesSupport local USB flash disk to read and load configuration filesDebugging network port comes with a ring out, no need to set up a router LAN, convenient for multi-computer cascade debuggingSupport free alignment function (in regular mode)Support zoom and image capture functionSupport monitor output functionSupport advanced connecting screenSupport connecting Magnimage C-Link series receiver card FW16-C All-in-1 Video Processor 2.2 Million Pixels Per 1G Cable Mach series control system improves the transmission of one network cable by 650,000 points to 2.2 million points ,breaking through the bottleneck of the traditional LED control system transmission.It simplifies the connection of LED screen and facilitates on-site wiring, saving time, effort and money. The whole machine is 8 main and 8 standby, The whole machine loading up to 17.6M Single controller integrates main and backup network cable output into an all-in-one machine, which improves the reliability of on-site activities and greatly saves the cost of equipment and long lan cables. 10G optical ports inputs/outputs 4 Layers Seamless Switching Supports multi-machine splicing Support multi-machine cascade splicing, easily control large resolution LED screen. Support interconnection with OPT port of V16 / V12 Support optical fiber interconnection with V16, V12, EC90 and other equipment, making signal transmission more stable and farther, and more cost-effective.  FW16-C Mach Series Parameters Standard Input parameter Port FW16-C-H FW16-C-D Quantity HDMI2.0 2  1 3840X2160/60Hz and customized  DVI 2 4 3840X1080/60Hz and customized OPT 1-4 4 4 For optical port input DP 1.2 2 1 3840X2160/60Hz、7680×1080 and customized 12G SDI 1 1 2160P/60Hz,Backward compatible (not supported by SD) Genlock 1 1   Output specification Port Quantity Resolution Ethernet port(connect receiving card) 16 In Mach mode,2.2M for the single port, max 17.6M loading for the whole machine;max horizontal 16380 px, max vertical 7680 px In normal mode,0.98M for the single port, max15.68M loading for the whole machine;max horizontal 16380px, max vertical 7680px HDMI LOOP 1 HDMI Loop, the same with HDMI2.0 HDMI Monitor 1 The output of the whole machine can be monitored,1920×1080/60Hz OPT 2 For optical port backup or copied signal input AUDIO OUT 1 3.5mm audio port Control port Port Quantity Resolution Suare opening USB 1 For pc software control RJ45 2 For pc software control or Multiple unit cascade control RS232 1 For RS232 control Unit Specification Input Power Voltage 100-240V AC 50/60HZ Power Consumption 50W Operating Temperature 0℃ - 45℃ Size（LxWxH） 482.6X421.3X88mm Net Weight 7.6KG  Further Information:FW16-CMagnimage FW16-C LED Video Controller SpecificationMagnimage FW16-C LED Video Controller User ManualC-Link_5.1.0.4_2024-07-01 Installation Program (Receiver Card Version 3.0 and above)C-Link_4.3.0.8_2023-11-10 installer (Receiver card version 3.0 or below)