2003-2004 Ford Mustang “Terminator” SVT Cobra Diode Dynamics Elite Series LED Fog Lights

Overview: Factory fog lights are built to meet minimum output requirements. Every aftermarket design available provides similar lackluster performance, but with an LED. The focus has been on LED appearance, not increased output. There has never been an aftermarket fog light designed from the ground up for performance - until now. Introducing the Elite Series Fog Lamps: the first OE-style fog lights that were designed for true performance. With a custom-engineered patent-pending optic, multi-die automotive emitters, and high-power full-copper circuit boards, the Elite Series fog light for the New Edge delivers up to 5 times more output than halogen lamps. With a plug-and-play installation, this is one of the easiest and most effective upgrades you can make to improve your visibility in inclement weather. Output that Outperforms. The Elite Series Fog Lamp is built around a highly-engineered single-piece toroidal lens. This optic was carefully designed using advanced optical simulation software to produce a light pattern that is wider than any other aftermarket fog lamp on the market, with an 80-degree spread of highly intense light. Even with this extremely wide band of light, the pattern is extremely smooth throughout, with an extremely sharp cutoff to avoid glare to other drivers, including a BMW-style “color flicker” at the very edge of the pattern. Diode Dynamics engineers accomplished all this while still meeting SAE F3 fog light standards, for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. White or Yellow. All Elite Series Fog Lamps are available in a cool white or selective yellow output color. The white is a 6000K color temperature, which is a true cool white output. This will perfectly match other LEDs on your vehicle, such as DRLs or running lights. The white option also offers a premium BMW-style color band at the very top of the beam pattern. The selective yellow option is 3000K in color temperature, which is great for high contrast in inclement weather, or in providing a distinctive look on the road. The yellow lamp consists of a yellow multi-die LED emitter paired with a yellow-tinted lens, to provide unmatched output and optical efficiency, even with the intense yellow output. Backlight Functionality. All Elite Series Fog Lamps come standard with an integrated amber accent light. This backlight feature fully illuminates the main lens with amber LEDs, intended to match other position, sidemarker, or corner lights. This feature can be wired to any constant 12-volt source for your desired vehicle function, using the included tap connector. It will shut off automatically if the main beam is activated. Check local laws and regulations for acceptable use. Bolt-On Fitment. Elite Series Fog Lamps were designed using a 3D scanner and installed on the vehicle in our testing garage, so you can rest assured they will be a perfect fit. They can be installed on your New Edge in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place, using sturdy brackets. With built-in adjustment, the lamps can be aimed after installation. To wire them up, a pair of waterproof plug-and-play adapters are included to connect the lights to your factory bulb sockets. Click here to learn how to aim your Elite Series Foglamps: How to Aim Your Fog Lights. Assembled with Quality - in the USA. Elite Series Fog Lamps are assembled in the USA using OEM-grade materials, including a precision aluminum casting, UV-coated outer lens, copper-core circuit board, and multi-die automotive emitters. After being assembled by Diode Dynamics in St. Louis, Missouri, they are robotically sealed with urethane epoxy for long-lasting protection against moisture, and packaged in form-fit foam for safe transportation. No expense has been spared, from materials to assembly, right here in America. In the Box: Two (2) Elite Series Type M fog lamps Two (2) 9006 4-pin DT backlight tap wires Two (2) 5202 4-pin DT backlight tap wires Two (2) T-taps Mounting guide Specifications What do these terms mean? Raw Lumens: White: 1,850 lm, Yellow: 1,650 lm, Backlight: 14 lm Intensity (cd): White: 13,000 cd, Yellow: 11,400 cd Color Temp (CCT): 1800K, 3000K, 6000K Beam Angle: Fog, 80°x6° Power (watts): White & Yellow Main Beam: 18, Backlight: 0.3 Operating Voltage: 9-16V Current (amps @ 13.2V): White & Yellow Main Beam: 1.4A, Backlight: 25mA Wire Size: 16AWG & 18AWG Polarity: Polarity Specific Operating Temperature: -40C to 85C (-40F to 185F) LED Emitter: Multi-Die Automotive Emitters Connector(s): Deutsch DT Input Driver Features: Constant Current Materials: Copper PCB, UV Coated Polycarbonate Lens, Precision Aluminum Casting Cooling: Passive, Pin-Fin heatsink Compliance Ratings: SAE J575 Durability Test, SAE J583 Foglamp Beam Pattern Intrusion Ratings: IP68 Waterproof Unit Weight (lb): 0.85 Product Weight (lb): 2.25 Shipped Weight (lb): 2.75 Application: Fog Light Installation Aiming Instructions: Click to view Installation Time: 30-60 minutes Tools Needed: Basic Toolset Modification: None Installation Guide: Click to download Compatibility: The kit is designed to work with cars equipped with the 2003-2004 Ford Mustang SVT Cobra "Terminator" Bumper or to replaces OEM Part# 2M5Z 15200AB, 2M5Z 15200AB, FO2592194. Depending on your car's OEM fog light plug, you may require a conversion harness. We can only guarantee fitment for fog lights that we tested. Although these are universal brackets, you may need to modify the bracket to fit your use case scenario.