Solution Finish Black Trim Restorer - 1 oz.

nish will stain clothing and skin. Make sure area to be treated is clean and dry. Shake bottle well and apply a small amount to applicator pad or microfiber sponge. Spread a thin coat over area in an even motion, covering area completely. Allow Solution Finish to penetrate for at least 1-2 minutes. Use a clean microfiber towel to buff off excess. For best results do not wash treated area for at least 4 hours. Tips and Precautions: Will stain skin or clothes - wear gloves during application For best results apply at 40 degrees F or above. Use adequate ventilation. Do not use on painted or glass surfaces; wipe off immediately with a clean applicator pad, terry cloth or Microfiber towel if solution gets on these areas. Use a paint safe cleaner if allowed to dry or as needed. Applicator pads can be reused if stored in a sealed plastic bag. Store Solution Finish in a cool dry place away from heat or flame.  Keep bottles tightly closed when not in use. Recommended Surfaces: Bumpers,pads