
Happymodel BeecoreX FR Brushed F4+ESC +VTX+RX+OSD Flight Controller For Inductrix Tiny Whoop E010 E010S - Frsky Receiver
Happymodel BeecoreX FR Brushed F4+ESC +VTX+RX+OSD Flight Controller For Inductrix Tiny Whoop E010 E010S - Frsky Receiver The BeecoreX is a ultimate flight controller for Brushed Tinywhoop , it include F4 FC, vtx , ESC, frsky receiver and betaflight OSD. It makes very easy to build a brushed tinywhoop. You only need to buy an FPV camera and brushed motors ,frame and propeller and then plug and play , No soldering require at all. Specification:Flight controller(Frsky SPI RX version) Betaflight Firmware target: CrazybeeF4FRMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: MPU-6000(SPI connection)Board size: 28.5 * 28.5MMPower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Brushed 4in1 ESCBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G VTX 25mw~100mw switchableBuilt-in SPI Frsky receiver(compatible with Frsky_D/ Frsky_X/ S-FHSS/ Redpine protocol)Built-in 5V 1A BECBuilt-in voltage detection Onboard Frsky SPI receiver VersionSPI BUS receiver Frsky versionCompatible with Frsky D8/D16 ( D8 is recommend) , S-FHSS , Redpine protocolChannels: 8chFailsafe supportNo ground interference ( Transmitter and receiver 1 m from the ground): 100m~200mRSSI compatible Onboard 5.8g VTXOutput power: 25mw~100mw switchableFrequency: 40CHInput voltage: 3.3V 5.5VCurrent consumption: 300mA(type)Frequency: 5.8GHz 5bands 40 channelsWith Race bandSmartaudio readyVTX POWER=1 (25mw)VTX POWER=2(50mw)VTX POWER=3(100mw)Recommend to use 50mw Recommend Runcam Nano3 camera , plug and play Notes:R1(RX1) Pad is used for IBUS/DSM2/DSMX signal inputIR1(IRX1) Pad is used for SBUS signal input (Already inverted)R1 and IR1 Cannot be used simultaneously Package Included:1*BeecoreX FR Brushed Flight Controller