NewBeeDrone BeeBrain BLV4 AIO Flight Controller ExpressLRS(ELRS) 2.4G

NewBeeDrone BeeBrain BLV4 AIO Flight Controller ExpressLRS(ELRS) 2.4G Warning! The BeeBrainBLV4 OSD might not compatible with third party camera. If you are planning to use it for customized build, Please be aware it only support the camera below:NewBeeDrone BeeEye CameraRuncam Nano4 Specifications:STM32F411 MCUESC Firmware: S-H-40 - Bluejay, 0.16, 48kHz.ESC Specifications: 4 channel 12A ESCESC Connector: JST-1.0 3PinNBD OSD (Betaflight OSD Compatible)Weight: 6.5 grams (including antennas and battery connector)Size: Outer dimensions 29 x 29 x 7.6 mmHoles: 25.5 x 25.5 mmBattery input: 1 – 2 S, connector: PH2.0UART2 TX and RX for onboard EXPRESSLRS receiver (SX1280)UART1 TX and RX freeVTX Adjustble power 5mW-25mW-SmartMAX .SmartMAX will automatically adjust the VTX power according to the board temperature. When the board temperature rises, the VTX power will be automatically reduced. When the temperature is low, the maximum output power can be up to 400mW Package Include:1 x BeeBrain BLV4 Flight Controller4 x Grommet4 x Screw1 x Receiver T-Antennas 1 x Receiver Antennas1 x VTX Antenna Firmware: 1. BeeBrain blv4 ELRS3.0 receiver firmware 2. BeeBrain blv4 ELRS2.0 receiver firmware3. BeeBrain blv4 ELRS Betaflight 4.4 firmware All firmware can be found on our Github Page Note: Binding process. power up the drone 3 times, on the third time you plug in power, the ELRS Receiver will get into binding mode. We are still trying to work on the ELRS firmware and make it able to just click the boot button to get into bind mode. Will get this update in the near future.