MakerFocus 10pcs Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New

Introductions:The transceiver consists of a fully integrated frequency synthesizer, a power amplifier, a crystal oscillator, a demodulator, modulator and enhanced ShockBurst, protocol engine.A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection.Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.Internal filtering results in high margins of meeting RF regulatory standards.The module #39;s radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC) Feature:Ultra small:15x29mm (including:built-in 2.4GHz antenna),for easy implementation into designs without additional hardwareLow power consumption:Ultra low power consumption as low as 11.3mA transmitting, 13.5mA receiving at 2Mbps, 900nA in power down and 26uA in standbyLow operating voltage:1.9 ~ 3.6V When using the nRF24L01 with an Arduino be sure to use the 3.3V output pin from the Arduino board to power the nRF24L01+ moduleCommunication range:262 feet (80 meters) in ideal conditionsMulti-channel:support six channels data receptionFast data transfer rate:2Mbps (software setting range: 1Mbps or 2Mbps)Multi frequency points:125 frequency points to meet the needs of multi point communication and frequency hopping communicationThe maximum transmit power:0dBm   Packing List: 10 * Arduino NRF24L01+ 2.4GHz Wireless RF Transceiver Module New