MakerFocus DockerPi Power Board 20W with Fan Remote Control Compatible with Raspberry Pi 4/3B+

Features: SMPSInput: 12V Typical output: 20W (5V/4A)Absolute output: 25W (5V/5A)3CM quiet cooling fanRemote control safe power (Require Driver)Button control safe power (Require Driver)Recommended to be stacked at the bottomCan stack with other stack boardIndependent of the mainboard hardware ( Safe power must develop by yourself)Raspberry Pi One-Step Automated Install Script:wget -qO- https://git.io/fj3b9 | sudo bash ★DockerPi power board is used to power the Raspberry Pi (or similar SBC) with a typical power of up to 20W (5V/4A) and can run up to 25W (5V/5A) with good heat dissipation. Wiki link: https://wiki.52pi.com/index.php/DockerPi_PowerBoard_SKU:_EP-0104#DockerPi_PowerBoard★It also provides power to other DockerPi modules to protect the security of the power supply. It also provides a safe shutdown function, supports IR remote control switch, button control switch. One-Step Automated Install(Raspberry Pi)--wget -qO- https://git.io/fj3b9 ǀ sudo bash. Reboot your Raspberry Pi and finish installation.NOTE:The LED status is incorrect until the drive is installed successfully!★It has 3*3cm quiet cooling fan, can effectively cool down. We recommend that install the power board on the bottom of the other DockerPi.★It is recommended to connect 12V 2A or above power input and 12V power from 4-pin headers to other DockerPi, If other modules require 12V power. Note: DockerPi Power Board does not support hot plug.★Official compatibility test. Support Raspberry Pi, Banana Pi M3, Orange Pi Zero. Other development boards can be compatible if they have I2C peripherals. Note: maybe need to change some software.   Packing List: 1 * Docker Pi Power Board for Raspberry Pi1 * Remote controller1 * Instructions4 * M2.5x12+6 Copper stick4 * M2.5x6 Nut4 * M2.5x6 Half-round head screw