MakerFocus DSTIKE ESP8266 Development Board WiFi Deauther Monster Module V4 with 1.3 OLED Display

Note: 1. Connect the battery in the right way! Power cost is around 100mA. If you use two 3500 mAh 18650 battery this board theoretically could work 70 hours.2. Battery isn't included, recommeding using two 3350mAh flat 18650 batteries.What is it?This ESP8266 development board comes with an integrated 18650 charging system, OLED display and a 3 way momentary slide switch.It comes installed with the latest ESP8266 Deauther software.With this software, you can perform different attacks to test WiFi networks.Please note that the ESP8266 does only support 2.4GHz. For more details on the software, visit:github.com/spacehuhn/esp8266_deauther.You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.What makes it special?Only ~100mA power usageUp to 35h of battery life with a 3500mAh 18650 cellIncluded 8dB antenna and Arcylic case4 LEDs to indicate battery status in real timeReverse LED indicate wrong battery directionPower button: Click to turn on, double click to turn off,long click will open high light LEDProtection: short, over charging, over discharging, temperature,polarityBreak out GPIOs of ESP8266Changes:Break out same pin map with deauthe oled V4Added polarity protectionAdded polarity indicate LEDAMS1117 changed to LM39100Added support for other 3.7V Li-batteryIncreased WiFi rangeGPIOs and hardware info:Display: SH1106 1.3" OLEDDisplay SDA: GPIO 5 (D1)Display SCL/SCK: GPIO 4 (D2)WS2812b LED: GPIO 15 (D8)Button Up: GPIO 12Button Down: GPIO 13Button Select: GPIO 14Breakout Pins:GPIO-16GPIO-3(RXD)GPIO-1(TXD)GPIO-5(SDA)GPIO-4(SCL)GPIO-0GPIO-23.3VGND5VUsage:You can use it with the display and buttons: https://github.com/spacehuhn/esp8266_deauther/wiki/Setup-Display-&-ButtonsYou can also connect to "pwned" with the password "deauther" and use the web interface: https://github.com/spacehuhn/esp8266_deauther/wiki/WebIf you lost the password you can reset it: https://github.com/spacehuhn/esp8266_deauther/wiki/FAQ#how-to-do-a-resetPacking List:1 * ESP8266 development board Deauther WiFi OLED V31 * 10p Pin Header1 * 8db atenna8 * Screw4 * Copper Support (Long)4 * Copper Support (Short)2 * Arcylic Case1 * Li-battery connector