ESP32 Development Kit M5Stack Atom Matrix PICO USB Type-C 4 MByte Flash with IMU Sensor
ESP32 Development Kit M5Stack Atom Matrix ESP32 PICO Development Kit USB Type-C 4 MByte Flash with IMU Sensor for Arduino UIFLOW and MicroPythonNote: The brightness of the RGB LED is limited to 20, so please do not set it to a too high brightness value to avoid damage to the LED and acrylic screen!!!ATOM Matrix is the most compact development board in the M5Stack development kit series. It provides more GPIO pins and is very suitable for handy and miniature embedded device development.The main control adopts the ESP32-PICO-D4 chip, which comes integrated with Wi-Fi and Bluetooth technologies and has 4MB of integrated SPI flash memory.The Atom board provides an Infra-Red LED along with the 5*5 RGB LED matrix on the panel, a built-in IMU sensor (MPU6886), and a PH2.0 interface. A general purpose programmable button is provied below the Neo Led matrix to enable users to add input support to their various projects.The on-board USB interface (Type-C) enables rapid program uploading and execution. One M2 screw hole is provided on the back for mounting the board. Applications: Internet of things terminal controller, IoT node, Wearable peripherals.Product descriptionATOM Matrix is the most compact development board in the M5Stack development kit series yet with a size of only 24 * 24mm. It provides more GPIO pins and is very suitable for handy and miniature embedded device development. The main control adopts the ESP32-PICO-D4 chip, which comes integrated with Wi-Fi and Bluetooth technologies and has 4MB of integrated SPI flash memory. The Atom board provides an Infra-Red LED along with the 5*5 RGB LED matrix on the panel, a built-in IMU sensor (MPU6886), and a PH2.0 interface. A general purpose programmable button is provied below the Neo Led matrix to enable users to add input support to their various projects. The on-board USB interface (Type-C) enables rapid program uploading and execution. One M2 screw hole is provided on the back for mounting the board.Product Features:USB Type-CESP32 PICO-based4 MByte flash1 Programmable button5 * 5 RGB LED matrix panelInfra-red LEDReset button2.4G SMD Antenna: Proant 440MPU6886 Inertial Sensor6* GPIO (Dupont Pins)4Pin PH2.0 interfaceProgram Platform: MicroPython, Arduino(https://www.arduino.cc/), UIFLOW(https://flow.m5stack.com/)Product Size: 24 * 24 * 14mmProduct weight: 12 gESP32 Features:240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPSIntegrated 520 KB SRAMIntegrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIPIntegrated dual mode Bluetooth (classic and BLE)Hall sensor10x capactive touch interface32 kHz crystal oscillatorPWM/timer input/output available on every GPIO pinSDIO master/salve 50MHzSD-card interface supportPackage Including:1 * M5Stack ATOM Matrix ESP32 Development Kit