Makerfocus Raspberry Pi Zero W Camera Night Vision Webcam with 2 Infrared IR LED Lights

Please note: The LED fill lights on both sides will warm up(generally in 40 to 50℃) when they working, but it is normal, please don't worry, they can keep working 20 hours, it will not damage the camera normally. You can adjust the micro adjustable resistor(beside the lights) to turned down the lights to Lower temperatures.SUPPORT TYPE:Raspberry Pi Zero /W，SUPPORT FOR PIXELS: The camera is capable of 2592 x 1944 pixel static images, and also supports 1080 p 30 fps, 720 p 60 fps and 640 x480 p 60/90 video recordingSENSOR: 5 megapixel OV5647 sensor ,Supports up to 2 infrared LED and/or fill flashSUPPORT VERSIONS: Raspberry Pi Night Vision Camera, supports all revisions of the raspberry pi(raspberry pi 2/3 need change ffc cable); Note:There is no raspberry pi zero board and FPC cable inside the package.When using this camera, please note: Normal problems: 1.The computer doesn't recognize the camera; The LED lights doesn't work (including one on and one off); The camera doesn't work after a period of use. Solution: Tighten the bolts of the LED and camera, then restart it. 2.The LED lights always turn on no matter if the camera is turned on or not. Solution: Connect the power supply to GPIO, then the LED light will be on only when the camera is turned on.Description:This is a night vision webcam camera for Raspberry pi zero W.Features:Raspberry Pi Zero/W Camera5 megapixel OV5647 sensorCamera specifications:CCD size: 1/4inchSensor best resolution: 1080p4 screw holesUsed for attachmentFocal Length: 2.1Diagonal angle: 60 degreeProvides 3.3V power outputDimension: 75mm x 25mm x 25mmNote:There is no raspberry pi zero board and FPC cable inside the packagePacking List:1 * Infrared Night Vision Webcam Camera Board 2 * Infrared IR LED Light