MakerFocus TTGO T-Camera Plus ESP32-DOWDQ6 8MB SPRAM Fish Eye Rear Camera
Description:Hardware SpecificationsChipset: ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa single-/dual-core 32-bit LX6 microprocessor Flash: QSPI flash/SRAM, up to 4 x 16 MB Sarm: 520 kB SRAM + 8MBytes External SPRAM Key: Reset Dispaly: IPS Panel ST7789/1.3 Inch Power Indicator Lamp: Red USB to TTL: CP2104 Camera: OV2640 2Megapixel On-Board Clock: 40MHz crystal oscillator Working Voltage: 2.3V-3.6V Working Current: About 160mA Working Temperature Range: -40℃ ~ +85℃ Size: 69.13*28.41*8.45mm Mic: MSM261S4030H0 SDCard: Integrated external SD card slot Power Management Chip: IP5306Power Supply: USB 5V/1A Charging Current: 1A Battery: 3.7V lithium battery WIFIStandard: FCC/CE/TELEC/KCC/SRRC/NCC Protocol: 802.11 b/g/n/e/i (802.11n，speed up to150Mbps)A-MPDU and A-MSDU polymerization，support 0.4μS Protection interval Frequency Range: 2.4GHz~2.5GHz(2400M~2483.5M) Transmit Power: 22dBm Communication Distance: 300m BluetoothProtocol: meet bluetooth v4.2BR/EDR and BLE standard Radio Frequency: with -98dBm sensitivity NZIF receiver Class-1,Class-2&Class-3 emitter AFH Audio Frequency: CVSD&SBC audio frequency Software specificationWifi Mode: Station/SoftAP/SoftAP+Station/P2P Security Mechanism: WPA/WPA2/WPA2-Enterprise/WPS Encryption Type: AES/RSA/ECC/SHA Firmware Upgrade: UART download/OTA（Through network/host to download and write firmware） Software Development: Support cloud server development /SDK for user firmware development Networking Protocol: IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT User Configuration: AT + Instruction set, cloud server, android/iOSappOS: FreeRTOS Data Download Link：https://github.com/Xinyuan-LilyGo/esp32-camera-screen. github: https://github.com/Xinyuan-LilyGO/esp32-camera-plus-bigiot. Packing List: 1 * ESP32 Camera Module T-Camera Plus Fish Eye Lens