3D-Fuel Buzzed Beer-based Filament

3D print with beer filament! Buzzed is a beer-based 3D printing filament made using waste byproducts from the beer making process. Buzzed uses those beer left-overs to create a special 3D printing material. 3D printing with Buzzed beer filament results in visibly unique print finishes. The filament produces products with a rich golden color and a noticeable natural grain. Buzzed beer filament can be printed on any machine capable of printing with PLA using standard PLA settings.Note: Because this material uses bio-waste, color may vary from batch to batch.500g (1.1lbs) spools                                                         Buzzed - Beer Filament Recommended Extrusion Temperature: Buzzed prints well at 180-210°C. In general, a good starting point is 10°C cooler than you typically print standard PLA.  Recommended Nozzle size: 0.5mm or larger diameter nozzles. Smaller diameter nozzles can be used but have a higher likelihood of clogging. Recommended Retraction Settings: