60A 36V Wifi MPPT Solar Charge Controller for 36V Li-NMC and LifePO4 Lithium battery V125 PV Start ON&BMS Activation

60A 36V MPPT Solar Charge Controller  Intelligent Maximum PowerPoint Tracking technology Built-in High-Performance DSP controller PV Start ON&BMS Activation ( Very important for Li-NMC and LifePO4 battery ) Three-stage charging optimizes lead-acid battery performance Charging voltage accuracy is +/-0.1V D06 to calibrate voltage Multi-function LCDs Output limited current protection Overcharge protection Over-temperature protection Easy to be mounted on the wall No need for an extra device to be in parallel No limited quantity to be in parallel Easy to set for lithium battery Suitable for battery types of Lithium and sealed lead acid, vented Gel battery Model No. 60A36V-V125 Charging mode MPPT Maximum power point tracking automatically Charging Lithium battery  Or 3-stage for Lead-acid battery： constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC36V  Charging voltage range 36V system (DC30V-DC39V)  You could set the voltage from 36V-51V.  Soft Start Time ≤1S Dynamic Response and Recovery Time 100us Max Efficiency ≥98.2%  (Voc is 1.5 or 2 times than battery, then it’s the best efficiency) PV Utilization ≥99% Self Consumption ≤1.2W Input Specification   Voc Range of PV ( Make sure the Voc of PV meets the requirement on the right. If Voc is 1.5 or 2 times the battery voltage, it’s the best efficiency. )  36V system (DC50V~DC160V) Maximum PV Module Open Circuit Voltage (Never over max PV Voc)  For 12V Battery: 160V The Maximum Nominal PV Power (The total power rated of PV can’t be over this watt that will break the controller.) 36V system (2100W) Output Specification Selectable Battery Type (Default is Lithium Battery)  Lithium / Vented/ Sealed / Gel / NiCd battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to the manual Floating Charging Voltage Refer to the manual Overcharging Protection Voltage 36V system (+1.5V)    Rated Output Current 60A Output Voltage Ripple-peak 100mV Output Voltage Accuracy ≤±1% Indicating   LCD Refer to the manual Protection Function Temperature Protection 75 °C / 167℉ Fan-on Temperature >45 °C / 113℉ Fan-off Temperature <40 °C / 104℉ PV Reverse Polarity Protection Yes (When Voc<100V only) PV Over-voltage Protection Yes (When Voc>180V, the controller will be burnt.) Battery Overcharge Current Protection Yes Battery Overcharge Voltage Protection Yes Battery Low Voltage Protection Yes Enclosure Acoustic Noise ≤40dB Cooling Way Forced air cooling Components Industrial grade Size (cm) 21.5*11.5*5 cm/8.46*4.52*1.96 in Net Weight(Kg) 1.3kg/2.86lb Gross Weight(Kg) 1.4kg/3.08lb Safety EN 62109-1 EN 60730-1 EN IEC 61000-6-3  EN IEC 61000-6-1 Protection Category IP21 Environmental Condition Indoor Operating Temperature -20℃ ~ +55℃ / -4℉ ~ + 131℉ Storage Temperature -40℃ ~ +75℃ / -40℉ ~ + 167℉   Content Included 1 MPPT solar controller 1 set of parts for case mounted 1 English manual   Reminder: Please choose the right warehouse for your purchase. The CN warehouse can ship to the world. The US warehouse ships to the USA only. The DE warehouse ships to European Union only. The AU warehouse ships to Australia only. The UK warehouse ships to the United Kingdom only.