Newest 60A 24V MPPT Solar Charge Controller w/Cloud service for 24V Li-NMC and LifePO4 Lithium battery V125 PV Start ON&BMS Activation
60A 24V MPPT Solar Charge Controller with Cloud service function for Android and IOS The V125 with CloudBox has internet service by Wifi and Bluetooth Intelligent Maximum PowerPoint Tracking technology Built-in High-Performance DSP controller PV Start ON&BMS Activation ( Very important for Li-NMC and LifePO4 battery ) Three-stage charging optimizes lead-acid battery performance Charging voltage accuracy is +/-0.1V D06 to calibrate voltage Multi-function LCDs Output limited current protection Overcharge protection Over-temperature protection Easy to be mounted on the wall No need for an extra device to be in parallel No limited quantity to be in parallel Easy to set for lithium battery Suitable for battery types of Lithium battery Model No. 60A24V-V125+CloudBox Charging mode MPPT Maximum power point tracking automatically Charging Lithium battery System type DC24V Charging voltage range 24V system (DC18V-DC29V) You could set the voltage from 24V-34V. Soft Start Time ≤1S Dynamic Response and Recovery Time 100us Max Efficiency ≥98.2% (Voc is 1.5 or 2 times than battery, then it’s the best efficiency) PV Utilization ≥99% Self Consumption ≤1.2W Input Specification Voc Range of PV ( Make sure the Voc of PV meets the requirement on the right. Voc is 1.5 or 2 times the battery voltage, so it’s the best efficiency. ) 24V system (DC37V~DC105V) Maximum PV Module Open Circuit Voltage (Never over max PV Voc) For 24V Battery: 105V The Maximum Nominal PV Power (The total power rated of PV can’t be over this watt that will break the controller.) 24V system (1440W) Output Specification Selectable Battery Type (Default is Lithium Battery) Lithium (defined voltage for other battery by user) Absorption Charging Voltage Refer to the manual Floating Charging Voltage Refer to the manual Overcharging Protection Voltage 24V system (+1.5V) Rated Output Current 60A Output Voltage Ripple-peak 100mV Output Voltage Accuracy ≤±1% Indicating LCD Refer to the manual Protection Function Temperature Protection 75 °C / 167℉ Fan-on Temperature >45 °C / 113℉ Fan-off Temperature <40 °C / 104℉ PV Reverse Polarity Protection Yes (When Voc<100V only) PV Over-voltage Protection Yes (When Voc>180V, the controller will be burnt.) Battery Overcharge Current Protection Yes Battery Overcharge Voltage Protection Yes Battery Low Voltage Protection Yes Enclosure Acoustic Noise ≤40dB Cooling Way Forced air cooling Components Industrial grade Size (cm) 21.5*11.5*5 cm/8.46*4.52*1.96 in Net Weight(Kg) 1.3kg/2.86lb Gross Weight(Kg) 1.4kg/3.08lb Safety EN 62109-1 EN 60730-1 EN IEC 61000-6-3 EN IEC 61000-6-1 Protection Category IP21 Environmental Condition Indoor Operating Temperature -20℃ ~ +55℃ / -4℉ ~ + 131℉ Storage Temperature -40℃ ~ +75℃ / -40℉ ~ + 167℉ Content Included One MPPT solar controller One Wifi box A set brackets and screws One manual Please download the Android APP from Here. Please download the IOS APP from Here. Please download the manual from Here. Reminder: Please choose the right warehouse for your purchase. The CN warehouse can ship to the world. The US warehouse ships to the USA only. The DE warehouse ships to European Union only. The AU warehouse ships to Australia only. The UK warehouse ships to the United Kingdom only.