Access Control Extension Panel UL (Up to 4 Doors)

NEW: Now this Module has Mobile Credentials.  The mobile credential can be setup with the same access level as a normal RFID card.  Download the "Malibu Mobile Credential"app to use your phone for access control.  It doesn't use Bluetooth.  It's the most simple yet secure mobile credential on the market. Door Controller Extension (4 Door) UL Listed Part# MAC-004-ALUL This UL Listed panel control 4 doors via RFID card access and managed by the easy-to-use Malibu access control module. It is a power supply/charger which converts a 115VAC/60Hz input into a single 12VDC or 24VDC non power-limited output. Mounting magnets are included to accommodate screws and nylon standoffs to allow for mounting various boards/accessories in any metal enclosure or back plane. **Back up battery not included** Note: Must have the UL Listed 4 Door Controller with Module (MAC-004-ALCM) to use this extension. The 4 Door Controller with Module controls the first 4 doors and this extension allows you to add 4 additional doors either in the same or different location. (Additional multiples of 4 doors require an extension for each set.) Each door requires a Monthly License Fee Per Door Please be sure to manually add a monthly subscription for each door needed. Door Controller Features PCB board size: 160 x106 mm (6.3 x 4.17 in) Case size: 273 x 228 x 65 mm (10.75 x 8.98 x 2.56 in) Power Supply: 12V DC 4-7A Power Consumption of Circuit Board: < 100mA Doors Controlled: 8 doors with MAC-004-ALCM Door opening time extending setting: 1-600 seconds (adjustable) Operation Temperature: -40℃~70℃ (-40ºF~158ºF) Operation Humidity: 10-90 ％ RH, No Condensation Quantity of users: 20,000 Quantity of Event Buffers(offline): 100,000 event buffers Power interruption protection measure: High Speed Memory, Records never lost Max Distance from Reader to Controller: 100m or 328ft (suggested distance 80m or 262 ft) Max Distance between Controllers: TCP/IP: Depends on net coverage area Alarm for door open for extended time, illegal break in, intimidate Unlock based on internal and external validation Power Supply Features Input: 115VAC, 60Hz, 3.5A Output: 12VDC or 24VDC selectable output 6A continuous supply current Filtered and electronically regulated output Short circuit and thermal overload protection Battery Backup (battery sold separately) Built-in charger for sealed lead acid or gel type batteries Automatic switch over to stand-by battery when AC fails Supervision AC fail supervision (form "C" contacts). Notification trigger is selectable for 30 seconds (factory set) or 6 hours. Low battery supervision (form "C" contacts). Battery presence supervision (form "C" contacts) Visual Indicators AC input and DC output LED indicators Temperature Operating 0° C to 49° C (32° F to 120° F) Storage - 20° C to 70°C ( - 4° F to 158° F) Relative Humidity 85% +/- 5% BTU/Hr (approx.): 12VDC: 37 BTU/Hr 24VDC: 74 BTU/Hr System AC input VA requirement: 402.5VA Enclosure Wall mount enclosure for indoor use Accommodates up to two (2) 12VDC/7AH Batteries Dimensions 13"W x 13.5"H x 3.25"D (330 mm W x 343 mm H x 83 mm D) 1/2" and 3/4" combination knockouts Mounting Magnet Features Customize the metal enclosure or back plane to accommodate power supplies, distribution boards, access controllers and accessories. Easy, fast installation saves time and labor – no drilling required Can be reused and re-positioned Zinc alloy cover eliminates the possibility of EMI/RFI 26 lb max strength 23.2mm (1”) diameter cup, 6.5 mm hole size Includes hardware (screws and standoffs) Package: 1 x Access Control Board 1 x Power Supply 1 x Panel Enclosure 4 x Mounting Magnets Product Weight (approximate): 7.55 lbs (3.42 kg) Spec Sheet: Panel and Power Supply 4 Door Controller Board Installation Instructions