RPNB 24-Gun Large Fireproof Biometric Fingerprint Gun Safe for Pistols and Rifles RPFS24

RPNB 24-Gun Large Fireproof Biometric Fingerprint Gun Safe for Pistols and Rifles RPFS24 Keep your valuable firearms secure with the RPNB 24-Gun Large Fireproof Biometric Fingerprint Gun Safe. This heavy-duty rifle safe is designed to hold up to 24 guns, providing ample storage space for your pistols and rifles.With multi-method entry, this biometric safe offers three ways to open it, including fingerprint recognition for quick and easy access. The safe also comes with an LED sensor light to help you locate your guns in low-light conditions. Constructed from anti-theft solid steel, this safe is built to withstand unauthorized access and resist tampering. It complies with the UL 72 Standard for fire resistance protection equipment, offering 40 minutes of fire resistance at 1200℉ to keep your firearms protected in the event of a fire.Invest in the security and protection of your firearms with the RPNB 24-Gun Large Fireproof Biometric Fingerprint Gun Safe. Features Heavy-Duty Fireproof Security Rifle SafeMade of anti-theft solid steel, heavier than 320 lbs. 16mm heat-resistant fire boards, and 2-way large solid steel bolts. Complies with UL 72 Standard for fire resistance protection equipment for 40 minutes at 1200℉. Adjustable and Flexible SpaceInterior allows for quick space optimization of space with ultra-flexibility. Each 24-gun fireproof rifle safe with 6 fully adjustable shelves and multi levels liftable height. Convenient Door Panel OrganizerIncluding 4 pistol holsters, 3 zippered pockets, 2 easy clip systems and 2 pop-up zippered pockets that can store things like handguns, documents, knives and other small valuables on the door panel. Multi-Method Entry3 ways to open the biometric safe just according to your different needs. The fireproof fingerprint gun safe is designed with an external battery compartment for easy making battery replacement more convenient in an emergency. Convenience Design and Full Coverage Soft Inner ProtectionCome with the LED sensor light on the sensor mode will turn on automatically. Factory-Installed Electrical Power Outlet configured with 3 AC Outlets and 2 USB Ports. Specifications Item Weight : 321.87 LBSExterior Dimensions : 58.98"×25.98"×20.00" (H × W × D)Interior Dimensions : 57.09"×24.41"×14.57" (H × W × D) Package Details RPFS241 Instruction Manual1 Handle Spoke Kit1 Door Organizer1 Removable LED Sensor Light2 Meters Power Cord6 Adjustable Interior Shelves4 Expansion BoltsShelf Support Clips Manual Fireproof Fingerprint Gun Security Cabinet Instruction Manual/ RPFS Series Opening the Safe with the Backup Key Press the tab left and turn the lock cover counterclockwise. Insert one of your backup keys into the keyhole, turn it clockwise, then turn the handle hub clockwise to open the door. Mounting the Spokes Find the handle spokes that are packed in a small box in the safe, mount three spokes to the handle hub. Battery Installation With the lock cover remove, locate the battery compartment. Connect a 9V alkaline battery (not included) to the battery connecting cap matching the polarity (+/-) indicated. When the battery is connected correctly, the indicator light will light up once with 1 beep. Place the lock cover, turn it clockwise back into its original position. NOTE:  When changing the battery, always hold the battery connecting cap while disconnecting or attaching the battery. Do not pull on the wires. Master Code Programming First time users should change the default code as soon as possible to prevent unauthorized access to your safe. The code should be kept confidential. Tips: Code Requirements Programming a new code will overwrite your previous code. Your code can be a minimum of 4 and a maximum of 6 digits. Two keys cannot be pressed simultaneously. Press anyone of "1,2,3,4" symbols until all keys (1-4) lights to wake up the system before entering your passcode. To get started, wake up the system and enter default code 1-2-3-4 on the keypad to open your safe. With the safe open, press the Program Button once and release it, the indicator light will light up BLUE once with 1beep. Enter your NEW master code. Press the Program Button once and release it, the indicator light will light up BLUE 2 times with 2 beeps. Now test the passcode after woke up the system. If you set the passcode unsuccessfully, the indicator light will light up RED 5 times with 5 beeps, and the new code will not work. You must repeat the above steps to reset the code. Fingerprints Registering With the safe open, press the Program Button once and release it, the indicator light will light up BLUE once with 1 Place your finger on the fingerprint sensor for the 1st of 4scans. Remove your finger after the indicator light lights up BLUE once with 1 beep. Place your finger again over the fingerprint sensor until the indicator light lights up BLUE once with 1 beep. You will repeat this process until the indicator light lights up BLUE 2 times with 2 beeps. Now your fingerprint has been successfully registered. Test your fingerprint. If you register the fingerprint unsuccessfully, the new fingerprint will not work. You must repeat the above steps to re-register your fingerprints. NOTE : You cannot register more than 20 fingerprints. If the indicator light lights up RED 5 times with 10 beeps when you register your fingerprint, it means the fingerprint storage capacity is full. Helpful Programming Tips: Place your finger on the center of the sensor (this allows the sensor to read where most of the fingerprint detail is located). Adjust your finger slightly between scans for increased accuracy. Excessive moisture, lotion, or dirt will affect your fingerprint and may cause inaccurate sensor reading. If you are experiencing difficulty try different fingers. Each finger is unique, and some fingers such as your thumb, contain more readable information than others. To increase your success rate, please register the same fingerprint multiple times. Registered Fingerprints Deleting Press and hold the Program Button until the indicator light lights up BLUE 2 times with 2 beeps. Now all previously registered fingerprints are erased. Lock-Down System If you enter the wrong code or unregistered fingerprints, the indicator light will light up RED 5 times with 5 beeps. If the wrong code or unregistered fingerprint is entered 5 consecutive times, the safe will go into a lock-down mode for 5 minutes. During this time the indicator light will keep flashing RED, the keypad and fingerprint sensor will be temporarily disabled. The safe can still be opened by using the backup keys override. After 5 minutes, the safe will automatically resume normal operation. Low Battery Warning If the indicator light lights up BLUE 1 second, and then lights up RED 10 times with 10 beeps when opening the safe by electronic way, your battery level is critically low and your safe needs to be replaced the new battery Vibration Alarm Setting Press and hold the number “4” for 4 seconds until you hear 1 beep and the indicator light lights up together. NOTE: During the alarm, the keypad and fingerprint sensor will be temporarily disabled, the safe can still be opened by the backup keys or you can reinsert the battery. After the alarm is deactivated, you need to reset the above steps. Locking the Safe Turn the door handle counterclockwise to close the door. Silence Mode Setting To silence the audible sound of the electronics, hold the number “1” for 3 seconds, until the indicator light lights up. To unmute the keys, repeat this step, you will hear 1 beep and the indicator light lights up together. Removable Sensor Light Attach the sensor light to the magnetic strip in the front of the top of the cabinet interior. For more setup tips, please refer to the Removable Sensor Light Manual. Shipping Skid Removing Locate the shipping skid that secured from the underside of the cabinet by 4 bolts. Remove the bolts with a wrench or 11/16" (17mm) socket. Now the shipping skid can be removed. IMPORTANT: Make sure the door is closed and locked before removing the shipping skids. Make sure a person stabilizes the safe to keep it from tipping when removing the shipping skids. It is highly recommended to utilize a trained professional for moving the safe properly. Securing Your Safe There are some expansion bolts included to mount your RPNB® safe to a flat concrete surface using the pre-drilled holes in the bottom. Use the clamping screws (not included) when there is a wooden surface. TIP: Make sure you have enough clearance for the door to open properly before mounting the safe. Using the Mounting Bolts Position the safe on a flat surface where you want to mount it. Use a pencil to mark the holes for drilling. Drill pilot holes. Position safe in place and install bolts through safe into pilot holes. Tighten bolts.