3M™ Cold Shrink QT-III 3/C Termination Kit 7622-T-110-3-RJS

Details  ID 3M106      7622-T-10-3-RJS Tape/Wire/UniShield®, 5-15 kV, Insulation OD 0.70-0.92 in, 3/kit Provides a void-free seal to tape shield, wire shield and UniShield® power cables High dielectric-constant material regulates the distribution of electric field stress Suitable for indoor applications Non-tracking, molded, silicone rubber insulation offers durability Includes 3 non-skirted, 1-piece, 3-phase, cold shrink terminations 3M™ Cold Shrink QT-III Silicone Rubber Termination Kit 7620-T and 7690-T Series contains one-piece, non-skirted, silicone rubber terminations, meets IEEE Standard 48 Class 1 for indoor and weather-protected applications. The kits are designed for terminating solid dielectric shielded power cable rated 5–35 kV, with tape shield, wire shield and UniShield® constructions. Each kit contains sufficient quantities of material to make three single-phase terminations. The termination assemblies consist of a tubular insulator, high dielectric constant (Hi-K) stress control tube, conformable Hi-K stress controlling compound, and built-in environmental top seal. The insulator is made of a dark gray silicone rubber with advanced tracking resistant and hydrophobic properties. Note: Lugs need to be ordered separately. Exceptions: For T-150 Kits, 150 kV impulse level meets the impulse requirements for 35 kV class equipment where indoor terminations are used. 7620-T Kits are designed and assembled with stress controlling compound only. Specifications BIL 110 kV Brands 3M™ Breakout Boot No Cable Insulation Outside Diameter Range 0.64-1.08 in Cable Insulation Outside Diameter Range (Metric) 16.3 - 27.4 mm Cable Shielding Wire Shield, Tape Shield, UniShield® Case Quantity 1 Conductor Sizes (Imperial) 1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 3/0 AWG, 300 kcmil, 350 kcmil, 4/0 AWG, 250 kcmil, 400 kcmil Indoor/Outdoor Indoor Non-skirted Insulation Level 133%, 100% Insulation Outer Diameter (Imperial) 0.81 in, 0.82 in, 0.83 in, 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.75 in, 0.76 in, 0.77 in, 0.78 in, 0.79 in, 0.8 in, 0.84 in, 0.85 in, 0.86 in, 0.87 in, 0.88 in, 0.89 in, 0.9 in, 0.91 in, 0.96 in, 0.97 in, 0.98 in, 0.99 in, 1 in, 0.92 in, 0.93 in, 0.94 in, 0.95 in, 1.01 in, 1.02 in, 1.03 in, 1.04 in, 1.05 in, 1.06 in, 1.07 in, 1.08 in Insulation Outer Diameter (Metric) 16.256 mm, 16.51 mm, 16.764 mm, 18.034 mm, 18.288 mm, 18.542 mm, 18.796 mm, 19.05 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm, 19.304 mm, 19.558 mm, 19.812 mm, 20.066 mm, 20.32 mm, 20.574 mm, 23.622 mm, 23.876 mm, 24.13 mm, 24.384 mm, 24.638 mm, 20.828 mm, 21.082 mm, 21.336 mm, 21.59 mm, 21.844 mm, 22.098 mm, 22.352 mm, 22.606 mm, 22.86 mm, 23.114 mm, 23.368 mm, 24.892 mm, 25.146 mm, 25.4 mm, 25.654 mm, 25.908 mm, 26.162 mm, 26.416 mm, 26.67 mm, 26.924 mm, 27.178 mm, 27.432 mm Insulation Rejacketing No Lug/Stem Connector Included in Kit No Maximum Installed Length 12.00 in Number of Conductors 1 Product Series 7620-T Units per Case 3.0 Voltage 8 kV, 15 kV, 5 kV Voltage Application Medium Voltage