3D Printer Filament PETG 1.75mm Plastic Filament Consumables PETG Material for 3D Printer Blue Color Printing Materials

3D Printer Filament PETG 1.75mm Plastic Filament Consumables PETG Material for 3D Printer Blue Color Printing Materials Specification:  Model No MR-Tough-PETG Cable Net Weight 1kg/roll Color Blue Nozzle Temperature 220-250℃ Bed Temp 70-80℃ Print Speed 30-90mm/s Bed Glass,PC or PEI    Cooling fan speed On Cable Size 1.75mm Feature High flow Recommended support material MAR™ MR-PVA Recommended Nozzle Diameter 0.2-1.0mm Raft separation distance 0.2-0.25mm Retraction distance 2-5mm Retraction speed 1800-3600 mm/min   Notice:The bonding between MR-Tough-PET and the PC bottom plate is very strong. When printing a larger bottom surface, the distance between the first layer of the model and the bottom plate can be appropriately adjusted. Product Description: MR-Tough-PETG is a tough PETG specially developed for FDM3D printing technology, and at the same time it has advanced printing performance by improving the fluidity of the material. Compared with PLA, it has better mechanical strength and heat resistance Product Advantages： 1.High Impact Resistance The notched impact strength of MR-Tough-PETG is increased to more than twice that of ordinary PETG without affecting the interlayer bonding strength in the Z-axis direction 2.Easy to Print MR-Tough-PETG has excellent material fluidity and good molding effect, which can be printed first in most printers. Material Properties: Property Testing method Typical value Density ISO 1183 1.24 g/cm³ Melting Temperature ISO 11357 78℃ Melt index 220℃, 2.16kg 13.2g/10min Determination of temperature ISO 75: Method A 73℃ (1.80MPa) ISO 75: Method B 78℃ (0.45MPa) Tensile strength(X-Y) ISO 527 40.3±0.6 MPa Young’s modulus(X-Y) 1780±80MPa Elongation at break (X-Y) 10.1±0.6 % Bending strength (X-Y) ISO 178 62.8±0.4 MPa Bending modulus (X-Y) 1919±54 MPa Charpy impact strength （X-Y） ISO 179 13.9±23KJ/㎡ Specimens printed under the following conditions: Nozzle temp 300°C, Bed temp 80℃, Print speed 45mm/s, Infill 100%, Infill angle ±45° Disclaimer: The typical values presented in this data sheet are intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. Actual values may vary significantly with printing conditions. End- use performance of printed parts depends not only on materials, but also on part design, environmental conditions, printing conditions, etc. Product specifications are subject to change without notice. Each user is responsible for determining the safety, lawfulness, technical suitability, and disposal/recycling practices of Mar materials for the intended application. Mar makes no warranty of any kind, unless announced separately, to the fitness for any use or application. Mar shall not be made liable for any damage, injury or loss induced from the use of Mar materials in any application.