In Stock Maytech DIY Foil Boost Kit with 3.5KW 6374 Waterproof Motor + 160A 32Bit Waterproof ESC + MTSKR1905WF Waterproof Remote

Application:  DIY foil assist on wing foil, wind surf foil, sup foil board, kite foil, underwater thruster, sup foil assist, paddle assist, wind foil board, sup board, downwind, hull cleaning device, underwater rov, underwater cleaning robot, boat cleaner, quariums or submerged environments, tank cleaning, underwater drone, etc.,  Aiming to convert non-electric foil boards to electric foil easily with reasonable cost.  1. 6374 waterproof motor, In Stock Model No MTO6374-150-WPC or MTO6374-150-WPC2 KV 150, can customize, contact agnes@maytech.cn if you want other KV Idle Current 0.8A Max Current 65A Rated Current 60A Input Voltage 3-12S Lipo (12-50V) Max Output Watt 3550W Shaft No output shaft Hall Sensor Without Waterproof Rank IPX8 Cable Length Ceramic Bearing motor is with 240mm long cables; Stainless stell bearing motor is with 1m long cables. Bearing Ceramic bearing or Stainless stell bearing Customize KV, logo, shaft, mounting hole pattern, color, connector, cable, etc. contact agnes@maytech.cn 2. MTSF160A-WP32 160A 32Bit IP68 Waterproof ESC: Model No.: MTSF160A-WP32 Waterproof Rank: IP68 Cont Current: 160A Peak Current: 180A Input Voltage: 6-14S Lipo (25V-60V) With 5V/0.5A BEC 32BIT Micropprocessor With progcard32 > Get E-Manual: MTSF160A-WP32 Manual and Instruction 3. MTSKR1905WF IP67 waterproof remote Model No MTSKR1905WF Waterproof Rank IP67 double waterproof Thr Mode ESURF (SF) and ESK8 (SK) 3 Speed Modes With, adjust throttle % from 20-100% Power Modes 2 levels, Eco (Level 1) < Pro (Level 2) Throttle Lock Yes, 10-30S optional Signal Format Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%.  PWM Signal Output Range 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode.  Double Source Power Supply Accept 5V power by ESC built-in BEC or extra 5V power Output Signal Max 3.3V Display Parameters Current, voltage, temperature only when work with VESC or Maytech MTSF300A-WP32 ESC;Signal strength, remote and battery power bars, battery voltage, RPM with VESC and other ESCs Control Pump Yes (Relay Switch) Control Light Yes (Transistor Switch) Safety Button Support Cruise Control With in Esurf Mode Brake With in Esk8 Mode Accessories Wirelss charging pad / Receiver / USB cable / Wristband / 3pcs Dupond cable Compatible Controllers VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote.  Application foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., > Get E-Manual: Remote Manual and Instruction > Check Video Using Instruction Click Here: How to Display Volt, Current, RPM with TX and RX?  4. Customer's Feedbacks ！ Stock Notice Before Place Order: 1. The motor 150KV is in limited stock,  so please confirm your order asap, or please contact us agnes@maytech.cn to check stock first if you need very urgently. KV can be customized, if you want to customize, we can do for you, please contact us for the KV you want.  2. Shipping time is about 24 working hours after your order confirmed for stock item, if not in stock, lead time is about 30-40 days. 3. Motor wire leads out position is specific, if wind one more circle or one less circle, the KV would differ much, hard to make exact KV, so each motor might has ±5%-10% tolerance, this is normal.