Maytech V2.0 Waterproof Remote MTSKR1905WF for Electric Surfboard Skateboard Efoil

If you want to use other cheaper but slower shipping method, please contact agnes@maytech.cn Shipping time by DHL or UPS is fast, normally 3-7 days arrive to you.   Difference of V2.0 and V3.0 MTSKR1905WF: V3.0: 2 levels signal strength options: L1 and L2 V2.0: Only 1 level, L0, save energy most Signal strength: L2>L1>L0 Working time at full battery: L0>L1>L2 Specification:  Model No MTSKR1905WF V2.0 Waterproof Rank IP67 double waterproof Thr Mode ESURF (SF) and ESK8 (SK) 3 Speed Modes With, adjust throttle % from 20-100% Power Modes 1 levels, L0 (Save power most) Throttle Lock Yes, 10-30S optional Signal Format Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%.  PWM Signal Output Range 1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode.  Double Source Power Supply Accept 5V power by ESC built-in BEC or extra 5V power Output Signal Max 3.3V Display Parameters Current, voltage, temperature only when work with VESC or Maytech MTSF300A-WP32 ESC;Signal strength, remote and battery power bars, battery voltage, RPM with VESC and other ESCs Control Pump Yes (Relay Switch) Control Light Yes (Transistor Switch) Safety Button Support Cruise Control With in Esurf Mode Brake With in Esk8 Mode Accessories Wirelss charging pad / Receiver / USB cable / Wristband / 3pcs Dupond cable Compatible Controllers VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote.  Application foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc., Updated functions: Add 3 speed modes options: you can adjust max throttle % from 20%-100%, good option for beginners.  Better waterproof performance.  Compatible with Maytech new MTSF300A-WP32 ESC: Could compatible with Maytech new small MTSF300A-WP32 ESC and can display voltage, current, temperature, etc parameters Display Voltage in % Throttle Lock Function: you can set lock time from 10-120s, safer to use.  > Get E-Manual: Remote Manual and Instruction > Check Video Using Instruction Click Here: How to Display Volt, Current, RPM with TX and RX?  The remote has 2 Modes, signal output pulse width is different in 2 modes: Esurf Mode is 1ms-2ms, no stop no brake, if you use Esurf mode to work with VESCTOOL compatible controller, please use below settings in VESCTOOL and to match with the remote: PPM Control Type: Current no reversePPM Mapping: Pulselength Start: 1.1ms; Pulselength End: 1.9ms; Pulselength Center: 1.5ms Or you can use wizard mode to detect compatible value.  Esk8 Mode is 1.5ms-1ms (Brake), 1.5ms-2ms (Speed up), 1.5ms is stop position. Please noted to match compatible parameters for different modes in VESC_TOOL.  If your surrounded has strong magnetic interference, the signal might easy get lost, suggest you order the version with 1m or 3m extend antenna.    Tips After Using: In order to avoid being corroded by sea water and to extend the remote life, please wash the remote in fresh water after using; Also please charge after the remote all dry.  Related Products:  Foil Assist Kits: