ARDUINO MKR VIDOR 4000
Description: With the MKR VIDOR 4000 you can configure it the way you want; you can essentially create your own controller board. It comes loaded with hardware and potential: an 8 MB SRAM; a 2 MB QSPI Flash chip - 1 MB allocated for user applications; a Micro HDMI connector; an MIPI camera connector and Wifi & BLE powered by U-BLOX NINA W10 Series. It also includes the classic MKR interface on which all pins are driven both by SAMD21 and FPGA. Plus, it has a Mini PCI Express connector with up to 25 user programmable pins. The FPGA contains 16K Logic Elements, 504 KB of embedded RAM, and 56 18x18 bit HW multipliers for high-speed DSP. Each pin can toggle at over 150 MHz and can be configured for functions such as UARTs, (Q)SPI, high resolution/high frequency PWM, quadrature encoder, I2C, I2S, Sigma Delta DAC, etc. The on-board FPGA can be also used for high-speed DSP operations for audio and video processing. This board also features a Microchip SAMD21. Communication between FPGA and the SAMD21 is seamless. specs: FPGA Intel Cyclone 10CL016 Mini PCI Express port with programmable pins Camera connector MIPI camera connector Circuit Operating Voltage 3.3V Digital I/O Pins 22 headers + 25 Mini PCI Express PWM Pins All Pins UART Up to 7 (depends on FPGA configuration) SPI Up to 7 (depends on FPGA configuration) I2C Up to 7 (depends on FPGA configuration) Analog Input Pins n/a Analog Output Pins n/a External Interrupts n/a DC Current per I/O Pin 4 or 8 mA Flash Memory 2 MB SDRAM 8 MB EEPROM n/a Clock Speed 48 MHz - up to 200 MHz Video Output Micro HDMI Microcontroller Microchip ATSAMD21 (Arm Cortex-M0+ processor) Wi-Fi U-blox Nina-W102 (VIN) 5V Supported Battery(*) Li-Po Single Cell, 3.7V, 700mAh Minimum Circuit Operating Voltage 3.3V Digital I/O Pins 22 PWM Pins 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19) UART 1 SPI 1 I2C 1 Analog Input Pins 7 (ADC 8/10/12 bit) Analog Output Pins 1 (DAC 10 bit) External Interrupts 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17) Flash Memory 256 KB SRAM 32 KB EEPROM No Clock Speed 32.768 kHz (RTC), 48 MHz LED_BUILTIN 6 Full-Speed USB Device and Embedded Host Included LED_BUILTIN 6 Length 83 mm Width 25 mm Weight 32 g