Garrett GVW-50 External Wastegate Kit 50mm

Features: CFD tested for maximum flow and thermal efficiency Optimized actuation stability and temperature resistance for superior durability Replaceable valve and bushing components to increase service life Robust design for easy diaphragm replacement Liquid-cooled actuator ports for use on severe applications (up to 52% reduction in body temp) Anodized aluminum actuator cover Four Colors: Red | Blue | Black | Silver Size: 50mm Springs | Fittings | Flanges | V-bands included Standard Base Pressure: 1 Bar | 14.5 PSI Maximum Base Pressure:GVW50: 23 PSI | 1.6 Bar Minimum Base Pressure: 3 PSI | 0.2 Bar Material Data: The valve housing is cast from high temp stainless steel and rated for exhaust temperatures up to 1050° C. CFD optimized for maximum flow and thermal efficiency. Valve Housing: High temp stainless steel rated up to 1050° C Diaphragm: High temp Nomex reinforced elastomer Actuator Cover: Fully-machined anodized 6061 aluminum Valve Guide | Bushing: Nitronic 60 Valve: high temp stainless steel with plated stem V-Band: CNC machined 304 stainless steel Flanges: Fully-machined 304 stainless steel Springs: 17/7 PH stainless steel Mechanical Data: Garrett Vent | External Wastegates are created by the engineers that designed G-Series and GTX Gen II turbochargers. Available in three sizes: 40mm | 45mm | 50mm Valve Diameter: 40mm | 45mm | 50mm Valve Mass: (40mm)1.27kg | 45oz (45mm) 1.47kg | 52oz (50mm) 1.56kg | 55oz Max Spring Base Pressure: 1.7 bar | 25 psi (1:1 backpressure ratio) Minimum Spring Base Pressure: 0.2 bar | 3 psi (1:1 backpressure ratio) Port Fitting | Air: M10x1.0 to hose barb (hose ID 6mm | .25in) Port Fitting | Water: M8x1.0 to AN-3 Thermal Data: When researching and testing common shortfalls of wastegates, we observed how heat cycling and normal wear can rapidly change their actuation characteristics. Garrett engineers created GVW as a high flowing product with low degradation in performance over its lifespan. Actuation data (opening and closing) in the chart was measured before and after extreme testing conditions. Results show the heat cycled GVW product maintains linear control of the wastegate as compared to the new product. Precise actuation of the GVW provides accurate calibration settings and performance throughout the lifespan of the product. Accurate wastegates, allow for optimum performance of the turbocharger. Max Thermal Stress (non-cooled): 270°C actuator body temp during thermal cycle test Max Thermal Stress (liquid-cooled): 130°C actuator body temp during thermal cycle test Max Exhaust Temp | Peak: Up to 1050°C 4 Color and Size Options: GVW Wastegates are available in four colors and three sizes Sizes: 40mm | 45mm | 50mm Colors: Red | Black | Blue | Silver Kit Contents: GVW Wastegates include all the following parts: Springs V-Band: Inlet | Outlet Outlet Flange Inlet Flange Valve Seat Washers: M8 | M10 Water Fittings Banjo Bolt and Banjo Fittings Air Plugs Wastegate Springs: GVW wastegates are set to 1 Bar | 14.5 PSI of base pressure and can be configured from 0.2 Bar | 2.9 PSI – 1.7 Bar | 24.7 PSI (considering 1:1 backpressure). Use the chart to reference wastegate size and spring color to identify Garrett GVW wastegate spring pressures Wastegate Flange Specs: GVW-50: Inlet OD 68.0mm | 2.68in Outlet OD 63.5mm | 2.50in  (Interchangeable with Turbosmart Gen V ProGate 50)