In Stock! Esk8 Comb 6365 170KV Motor+VESC50A Controller for Electric Skateboard/Fighting Robots

Esk8 Comb 6365 170KV Motor+VESC50A Controller for Electric Skateboard/Fighting Robots 2 Kits: Comb 1: 1x MTO6365-170-HA-C 8mm Shaft Brushless Outrunner Sensored Motor with Closed Cover + 1x MTVESC50A VESC4.12 Based Speed Controller Comb 2:  1x MTO6365-170-HA-C2 10mm Shaft Brushless Outrunner Sensored Motor with Closed Cover + 1x MTVESC50A VESC4.12 Based Speed Controller   a) Maytech water-proof electric skateboards brushless motor 6365 170KV with hall sensor and closed cover for electric mountainboard Model NO MTO6365-170-HA-C2 Motor KV 200(RPM/V) Shaft 10 mm shaft.output shaft length 34mm Idle Curren 0.8A Max. Current 65A Input Volt 2-12Lipo cell Max. Output Watt 3520W Max. Pull 9700g Net Weight 765g Motor Diameter 63mm Internal Resistance 0.0402 Hall Sensor sensored Applicaition For electric skateboards/e-bike Features Waterproof and dustproof function b) Maytech electric skateboards brushless motor 6365 170KV with hall sensor and closed cover for diy electric skateboard Model NO MTO6365-170-HA-C Motor KV 200(RPM/V) Shaft 8mm shaft with 3mm keyway Idle Curren 0.8A Max. Current 65A Input Volt 2-12Lipo cell Max. Output Watt 3520W Max. Pull 9700g Net Weight 668g Motor Diameter 63mm Internal Resistance 0.0402 Hall Sensor sensored Applicaition For electric skateboards/e-bike Features Waterproof and dustproof function   2. VESC Specification Application e-skateboard/E-bike BEC 5V BEC Lipo 3-12Cells Voltage 8V-60V Accessory with USB cable Package W/ Box Capacitors 3pcs 680uf 63V Dimension of VESC board 60x40mm Power wire Silicon wire Connectors 5.5mm Golden Connectors   Application: Electric skateboard, Esk8, longboard, mountainboard, offroad skateboard, city skateboard, street skateboard, motorized skateboard, electric longboard, electric surfboard, Esurf, Efoil, electric foil, foilsurf, foilsurfing, surffoil, surfjet, jetski, jetboard, electric hydrofoil, etc.,, ROV/ROVEEE/remote operated vehicle, underwater robot, Underwater Robotics/underwater remotely operated vehicles, subsea robots,cablecam, broadcast, IBC2019, Ultra drones,security monitoring robots，robots for security and safety monitoring in harsh terrain, agile robots， autonomous agile robots， security robots， autonomously monitor security, combat robots, fighting robots, etc., Maytech VESC Advantages: The 5.5mm golden connectors are soldered on the VESCs. It costs extra expense and also extra soldering processing method. Maytech VESCs come with 3pcs pf 680uf 63V capacitors which are soldered on the capacitor PCB. The capacitors are very important for every ESC. They can make sure the ESCs’stability when the ESCs speed up or slow down. Why do we solder the capacitors on the capacitor PCB? a)The capacitor PCB can stabilize the 3pcs 680uf 63V capacitors better than those are attached on the cables. b)The capacitor PCB make the VESC look good and clean. 3. Maytech VESCs come with the USB cables and the sensor cables. The USB cables are used for programming. The sensor cables are used for the sensored motors when the original sensor cables on the motors are not compatible with the VESCs. Maytech uses the genuine Mosfets which come with circles and unclear writing. However, the substituted Mosfets are with the clear writing and no circles. Many suppliers use the substituted Mosfets because of the lower cost.