(Motor+ESC+Remote) electric skateboard mountainboard kit MTSVESC6.0 200A VESC based ESC and brushless Red cover motor (non-sealed motor) and Remote
michobby.com
Sporting Goods / Outdoor Recreation

(Motor+ESC+Remote) electric skateboard mountainboard kit MTSVESC6.0 200A VESC based ESC and brushless Red cover motor (non-sealed motor) and Remote

$475.60
Store Logo

MICHOBBY.COM

View Store

(Motor+ESC+Remote) electric skateboard mountainboard kit MTSVESC6.0 200A VESC based ESC and brushless Red cover motor (non-sealed motor) and Remote Price includes 1pcs ESC and 1pcs motor and 1pcs remote 1. Specifications of MTSVESC6.0 200A ESC based on VESC6 speed controller: Application electric skateboard longboard/fighting robots combat robots/elctric surfboard BEC 5V/1.5A Lipo 3-12Cells Voltage 8V-60V Hardware version based on VESC6.0 Firmware version updatable  Cont. Current 200A Burst Current 280A Capacitors With high quality aluminum case, better heat dissipation Case Size 108mm(L)x75mm(W)x27mm(H) Power wire Silicon wire 2. Motor specifications Model No. MTO6355-190-HA MTO6365-200-HA MTO6374-190-HA With Hall Sensor With Hall Sensor With Hall Sensor KV 190  200  190  Idle Current 1.0A 0.8A 0.8A Max. Current 65A 65A 65A Input Volt 2-12s Lipo 2-12s Lipo 2-12s Lipo Max. Output Watt 3510W 3520W 3550W Max. Pull 12000g 9700g 13000g Rated Current 55A 60A 60A Motor Weight 600g 745g 825g Shaft 8mm 8mm 8mm Output shaft length 26mm 26mm 26mm Resistance 0.0441  0.0402  0.0402 3. Specification of MTSKR20WFV2 waterproof Remote controller with screen and receiver: Model No. MTSKR2005WF (MTSKR20WFV2) Waterproof Rank IP66 Control Mode New Esk8 Application Only for Electric skateboard, elongboard, mountainboard  Speed Display Yes Travel Mileage Yes Throttle and brake  Display ±100% VESC Control Mode Duty Cycle/ Current Mode Speed Mode 3 speed modes, each mode can adjust speed from 1%-100% throttle Accessories Wireless charging pad; receiver; 3pcs dupont cable Charger QC 2.0 wireless  Wireless Frequency 2.4GHz wireless with 40 channels Display Screen OLED yellow & blue screen Triggers 2x high senstive triggers Throttle and Brake Signal Output Range 1.5ms-2ms for throttle; 1.5ms-1ms for brake Telemeter Data by Receiver Motor RPM; main battery voltage Voltage Display Remote & main battery voltage level (lithium iron; lithium ion battery optional) Telemeter Data by VESC ESC voltage/ current/ temp; Motor temp/ RPM Compatible ESCs VESCTOOL/ Focbox/ Other PWM ESCs that has same signal output range with the remote Receiver Built-in Switch for Esk8 Light / Esurf Water Pump 1x 30V 3A mechanical relay switch;  1x 20V 2A transistor electronic switch  MTSVESC6.0  

Show More Show Less