(Motor+ESC) Robot kit electric skateboard kit 100A VESC based Speed Controller MTSPF60100 and Brushless Red Cover Motor (non-sealed motor)

Motor+ESC: Robot kit electric skateboard kit 100A VESC based Speed Controller and brushless Red cover motor (non-sealed motor) Price includes 1pcs ESC and 1pcs motor 1. Specifications of VESC100A 100A ESC based on VESC speed controller MTSPF60100 Model No. MTSPF60100 Current 100A Input Voltage 3-12S Lipo (12.6V-50V) Feature VESC_TOOLCompatible Hardware VESC6.0 BEC 5V Firmware Updatable Cooling fin Final standard ESC will come with cooling fin Application electric skateboard longboard, fighting robot, e-bike, electric mountainboard, Cable camera, underwater drone, foil assist, surf assist, ROV, etc. Port definations:1.USB port for programming;2.SWD port to get direct access to the Chipset. Diagnostics, debugging, and real time data;3.Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders);4.CAN Port for CAN communication with other devices and VESC arrays;5.COMM port for various kinds of other communication methods like I2C, ADC, Uart,You can use your Arduino or Raspberry Pi to control the VESC! Also it includes an extra pin for PPM;6. PPM port to connect PPM transceivers.  2. Motor specifications Model No. MTO6355-190-HA MTO6365-200-HA MTO6374-190-HA With Hall Sensor With Hall Sensor With Hall Sensor KV 190  200  190  Idle Current 1.0A 0.8A 0.8A Max. Current 65A 65A 65A Input Volt 2-12s Lipo 2-12s Lipo 2-12s Lipo Max. Output Watt 3510W 3520W 3550W Max. Pull 12000g 9700g 13000g Rated Current 55A 60A 60A Motor Weight 600g 745g 825g Shaft 8mm 8mm 8mm Output shaft length 26mm 26mm 26mm Resistance 0.0441  0.0402  0.0402