Hitachi KP-M1U Digital Microscope C-Mount Camera w/ Power Supply for Parts

Hitachi KP-M1U CCD Digital Color Microscope Camera w/ Power Supply Description: This unit has the following features:Sensor pick up device: 1/3" interline transfer CCDSignal standard: EIA MonochromeSensing scanning area: 4.88 (H) x 3.09 (V) mmTotal number of pixels: 811 (H) x 508 (V)Number of effective pixels: 768 (H) x 494 (V)This unit has the following specifications:Pixel pitch: 6.35 (H) x 7.4 (V) µmScanning frequency: 15.734 kHz (H), 59.94Hz (V)Sync system: Internal or external (automatic switching)External sync input: HV/VD 2 to 6 volts p-p input impedance 1kohm, frequency deviation ±1%, negative polarityResolution: 570 (H) x 485 (V) TV linesScanning system: 2:1 interlaced / 525 lines / 60 fields per second / 30 frames per second or non-interlaced (only in external sync mode or with modification)Standard sensitivity: 400 lux @ f4 (3200K)Minimum sensitivity: 0.5 lux at f1.4 (with AGC on, gamma 0.45, without IR cut filter)Electronic Shutter: off, 1/100th, 1/125th, 1/250th, 1/500th, 1/1,000th, 1/2,000th, 1/4,000th, 1/10,000th (selectable by external switch)Gamma correction: 0.45 or 1.0 (selectable by internal switch)Signal to noise ratio: 56 dBAGC: Normal or AGC (selectable by internal switch)Video output: VS 1.0 volt p-p 75 ohms unbalanced. (0.7 volts p-p video and 0.3 volts p-p sync negative polarity)Integration mode: Field or frame integration (selectable by external switch)Field on demand function: Switchable on/off by internal switchRestart reset operation: On/Off selectable by component changeLens mount: CFlange focal distance: 17.526 mmDimensions: 44 (W) x 29 (H) x 72 (D) mmWeight: 120 grams (approx)Supply voltage: 12 volts dc ±1 voltCurrent consumption: 180 mA (approx) *Dust cap included Listed with ExportYourStore.com