Bitmain APW3++

APW3++ is a power supply from BITMAIN that can deliver a 1600W for the BITMAIN miners. It is energy efficient and the official power supply for the BITMAIN Antminer S9 & Antminer L3+. Pre-Buying Guide The power cord is not included. Requires a power cord with at least 10A capacity. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. This batch of PSU comes with only 10 PCIe connectors, so it can not be used with more than one Antminer S9 / Antminer L3+ miners. Specifications Output DC Voltage 12.15V Rated Current (220V input) 133A Rated Current (110V input) 100A Rated Power (220V input) 1600W Rated Power (110V input) 1200W Ripple & Noise <1% Voltage Regulation <2% Source Regulation <1% Load Regulation <1% Setup, Rise Time <2S Power off Protection Trip Time >9mS Interface Type 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors) Noise Level <43DB Input Voltage Range 100-240V AC Starting Voltage 95-105V AC Frequency Range 47-63Hz Power Factor >0.95 (full load) Leakage Current <1.5mA (220V 50Hz) Protection Low-voltage Input 80-89V AC Output Short Circuit Yes Output Overcurrent 134-185A max. Overheat Protection Yes Environment Conditions Operating Temperature -20°C - 50°C Operating Humidity 20% - 90% relative humidity (non-condensing) Structure Dimensions 220mm*108mm*62mm Cooling Fan Forced-air cooling