MiSTer FPGA IO Analog Pro
Unlock the analog potential of MiSTer FPGA with IO Analog Pro! Boasting accurate analog video, crystal clear analog audio, soft power toggle, and compatibility with the incredible MiSTer passively cooled aluminum armor case. Existing case owners can purchase a replacement rear panel. Features Note: DIP switches only on V1.0. V1.1 has 24-bit RGB permanently enabled. Reference-quality analog video and audio via Sega Saturn AV port 99% accurate to specifications RGBs YPbPr with improved sync levels and correct 700mV Luma S-Video (native YC core support) Composite Video (native YC core support) DIPs to enable 24-bit video depth (Enabled by default) Hi-Fi analog audio Mini TOSLINK digital audio USB-C power (5V 2A minimum, 5V 3A limited). It works with USB-A and USB-C cable types. Check your power supply if you’re not sure. DC power jumper is used to route power to the USB hub from the DE10-nano. Reset button is now a power toggle button (experimental) that controls the USB C power input. Might need an extra tap every once in a while. User port for SNAC and mt32-pi Simultaneous analog and HDMI output Single SDRAM support Looking for dual SDRAM IO board, and don't mind giving up simultaneous HDMI and analog video? Check out my upcoming IO Direct! No cores currently require dual SDRAM. Jaguar (alpha), Saturn (beta), and Williams Y/Z unit arcade machines (upcoming) all need or benefit dual SDRAM. Included Accessories DC Power Jumper 40mm fan (optional) 20mm heatsink (optional) Recommended Accessories Saturn (Mini-Din-10) Universal Video Cable Saturn (Mini-Din-10) SCART Video Cable Saturn (Mini-Din-10) HD15 VGA Video Cable Aluminum Case Rear Panel (running low on some colors - consider black and a Shock+ as an alternative until I can make more). Reflex Volt USB PD 1C Power Supply 100W USB PD Cable with Power Meter Configuration Please refer to the MiSTer.ini section of the Guide page MiSTer.ini for RGB: vga_mode=rgb composite_sync=1 (Toggle IO board’s switch to the “OFF” position) MiSTer.ini for YPbPr: vga_mode=ypbpr composite_sync=1 vga_sog=1 (Toggle IO board’s switch to the “ON” position) MiSTer.ini for S-video and Composite: vga_mode=svideo composite_sync=1 (Toggle IO board’s switch to the “OFF” position) Video measurements Note: All non-MiSTer Addons measurements were taken by Kuro Houou.