JL Audio MX Marine Amplifier 3-Channel Full-Range 600 Watts 12v

JL Audio MX Marine Amplifier 3-Channel Full-Range 600 Watts 12v98409Model: MX600/33-Channel Class D System Amplifier, 100 W x 2 + 400 W x 1 @ 2 ohms / 75 W x 2 + 250 W x 1 @ 4 ohms - 14.4VEngineered specifically for powersports applications, the 3-channel MX600/3 amplifier employs our high-speed NexD™ switching design to deliver plenty of clean power, without straining charging systems. Its tiny, cast aluminum housing is highly resistant to corrosion, with an IPX7 water-resistance rating, making it perfect for motorcycles, ATV’s or other utility vehicles.Generating a potent 75W x 2 into 4 ohms, plus a solid 400 watts for a subwoofer system, the MX600/3 makes a great all-in-one solution for driving a complete audio system from a single, ultra-compact chassis.Onboard filters include a 12 dB / octave high-pass crossover on the main channels and a dedicated 24 dB / octave low-pass crossover for the subwoofer channel. Other features include a bass boost EQ, variable infrasonic filter and subwoofer output polarity switch. A dual-range input section accepts a wide range of input voltage levels, from line-level all the way to high-power speaker level signals.This amplifier features a rugged powder-coated finish, a gasketed cover for the controls and stainless steel hardware for durability.USA Limited Warranty: Two (2) years from the original date of purchase.Specifications Rated Continuous (RMS) Power @ 14.4 V Main Channels @ 4 ohms 75 W RMS x 2 Main Channels @ 2 ohms 100 W RMS x 2 Main Channels - Bridged @ 4 ohms 200 W RMS x 1 Subwoofer Channel @ 4 ohms 250 W RMS x 1 Subwoofer Channel @ 3 ohms 300 W RMS x 1 Subwoofer Channel @ 2 ohms 400 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A Rated Continuous (RMS) Power @ 12.5 V Main Channels @ 4 ohms 50 W RMS x 2 Main Channels @ 2 ohms 80 W RMS x 2 Main Channels - Bridged @ 4 ohms 100 W RMS x 1 Subwoofer Channel @ 4 ohms 200 W RMS x 1 Subwoofer Channel @ 3 ohms 250 W RMS x 1 Subwoofer Channel @ 2 ohms 300 W RMS x 1 Subwoofer Channel @ 1.5 ohms N/A General Specifications Frequency Response 20 Hz - 20 kHz (+0, -1dB) S/N Ratio, referred to highest rated power >88 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >68 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >92 / 50 Hz Damping Factor @ 2 ohms >43 / 50 Hz THD+N @ Rated Power (Main Channels) <1% @ 2 ohms per Ch. THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 ohms per Ch. Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 580 mV - 14 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 60 A (AFS, AGU or MaxiFuse™) Signal Processing Filter Slope(s) 12 dB/octave Filter Frequency Range: Channels 1 & 2 (front) 35 Hz - 300 Hz Filter Frequency Range: Subwoofer Channel 40 Hz - 400 Hz Filter Mode(s): Channels 1 & 2 (front) High-Pass only Filter Mode(s): Subwoofer Channel Low-Pass only Detented, Calibrated Filter Freq. Potentiometers Yes Filter Defeat Function Yes Remote Subwoofer Level Control Optional (RBC-1) Remote Level Modes N/A Channel Input Mode Switch Yes (2/4 ch.) Pass-Through Preamp Output None Source Channel Selection for PreOuts N/A Physical Specifications Height 1.77 in / 45 mm Width 9.33 in / 237 mm Depth 4.50 in / 115 mm