MPXV Pressure Sensor Breakout Board

This is a breakout board for a family of Honeywell pressure sensors. The assembled versions of the board are populated either with a +/- 1 psi sensor (MPXV7007DP) or a +/-.3 psi MPXV7002DP. There are several other sensor models listed below (there also may be others), which will also fit on the board.  The currently stocked MPXV700xDP sensors are five volt sensors and the outputs float at 2.5 volts, with no pressure on the input. Suction will cause the sensor to output lower voltages, pressure will cause it to output higher voltages. Both sensors are differential sensors, meaning that they have two ports, so you can hook them up deferentially, such as in a pitot tube. Model aircraft builders and rocketeers take note. The +-1psi range corresponds fairly closely with human lung capacity. I was able to pin the sensor at just shy of zero and 5 volts respectively, by exerting a fair amount of effort sucking/blowing on a piece of tubing attached to its port, but not having to exert truly he