Matrix Picfix for V9-V12 Ps2 consoles

This listing is for a Matrix Picfix for V9-V12 Ps2s.  The board has been revised to accommodate v9s-12s   For V9 consoles, bridges pads 1 and 2 to set it to the 2kohm resistor for v10-v12 bridge pads 2 and 3 to enable the 1.5kohm resistor. If installing on a v10-v12 and your console refuses to get out of standby, switch to pads 1 and 2. It's not common but sometimes v10-v12s need the higher value.    There is well known issues for these revisions of the Ps2s. Basically, if you insert a scratched disc or media that your ps2 just doesn't like, it can crash the mechacon. This will result in the laser burning itself out. There are various fixes for the various revisions but the matrix picfix is debatably the best solution. It essentially detects if the mechacon crashes and will force the console into standby mode which prevents the laser from burning out.  DISCLAIMER! - It highly advised that you use OEM Ps2 power supplies! I have tested some v12 slims with these installed and using an aft