F2A3X Frequency to Analog Converter/Tachometer with NIST Certificate

  Buying direct from manufacturer: Tax-Free • Unlimited Tech Support • Free Shipping for orders over $250 in contiguous USA! View Accessories Description Description The F2A3X Frequency to Analog Converter is a DIN rail module that converts a frequency input signal into a proportional analog voltage (0-5 V dc) or current (4-20 mA) output. The output signal is electrically isolated from the input signal and input power source, effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or any source of digital signal not exceeding 12 volts. The F2A3X is completely user-programmable using the free downloadable PM Remote Software. A NIST Traceable Certificate is included. TYPICAL USES  Process monitoring over networks Tachometer signal generator Quality control R&D Engine performance Signal conditioning Data acquisition Motor or pump monitoring Features Features Standard DIN rail mounting Ethernet communications available 5 to 999,990 RPM range (0.083 to 150 kHz) Compatible with most speed sensors (TTL) 12 to 24 V dc input power Alarm setpoint with optional relay output Pulse repeater output User-configurable View real-time data on PC 4-20 mA or 0-5 V dc scalable output 10 V dc or 5 V dc sensor excitation NIST Traceable Certificate included   Specifications Specifications* Input Range 5-999,990 RPM speeds below 5 RPM possible with multiple pulses per revolution (0.083 Hz to 15.0 kHz) Input Configuration and Voltage Range 1 to 9,999 pulse per revolution or use a scale factor of 0.0001 to 99,999; PC software programmable, TTL input and 1.1 V to 25 V dc signals – Internal Jumper for ±1 to ±25 V ac Analog Output Voltage: 0-5 V dc, 5 mA max load, Isolated or 4-20 mA Isolated, 500 ohms max load, Internal 12 V compliance voltage, 16-bit resolution; full scale and offset RPM ranges PC programmable Accuracy/Resolution 0.005% of full scale output / 76 µvolts or 30.5 nanoamps Output Update Software selectable up to 244 times/sec; dependent on the input frequency Memory Max and min. recall via PC software Dimensions 1/8 DIN by 3.94 in. [100 mm] deep Input Power Standard 12-24 V dc, 4.5 W max or optional 12 V dc to 24 V dc isolated 4.5 W max Sensor Excitation 10 V dc @ 60 mA standard or 5 V dc @ 60 mA optional Pulse Repeater Output 0-5 V TTL compatible, one pulse out for each pulse in; polarity is software selectable Communications Ethernet RJ45 or USB type B Alarm Capability Optional alarm with relay output Setpoints: high or low alarm limit, latching or non-latching PC programmable Alarm Outputs 1 form C relay contact, rated 1A at 115 or 230 V ac Alarm Reset Automatic or manual reset; front panel push button or remote reset via PM Remote Software Environmental Indoor use only; installation category II per IEC 664 Temperature: -10 °C to 50 °C, operating per IEC 61010-1 Humidity: 80% max to temps up to 31 °C, decreasing linearity to 50% RH at 40 °C Electrical Safety Meets EN61010-1:2001, EC low voltage directive 2006/95/EC   *Specifications are subject to change without notice. PM Remote Software PM Remote Software PM Remote Software is a free downloadable Windows-based software application that allows users to quickly and easily customize the configuration of Monarch’s ACT-1B, ACT-3X, F2A1X, and F2A3X panel tachometers. Set the mode of operation to RPM, RPS, or Frequency and select the input scale (pulses per revolution). Real-time data can be displayed directly on the PC along with min and max values. Decimal places and display update rates are user-configurable. Click here for complete details and to download the software.   Features Allows quick setup of ACT-1B, ACT-3X, F2A1X, and F2A3X Display live data remotely on PC Unit configuration can be saved for reloading in the feature     Click here for complete details and to download the software.   Shipping Codes Shipping Codes for F2A3X Frequency to Analog Converter/Tachometer (all models): Harmonized Tariff Code:  9029205000 Country of Origin:  US Export Control Classification Number (ECCN):  EAR99 Downloads Literature F2A3X User Manual Software PM Remote Software PM Remote Software Manual