ROLS - Remote Optical Laser Sensor

Five Models to choose from! All include an 8 ft. cable, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape. ROLS-P-25 and ROLS24-W-25 include a 25 ft. cable. Buying direct from manufacturer: Tax-Free • Unlimited Tech Support • Free Shipping for orders over $250 in contiguous USA! View Accessories Description Description 1-250,000 RPM. Extremely versatile and able to work over long distances (up to 25 feet). The ROLS-W (tinned wire termination) and ROLS-P (1/8" phone plug termination) are threaded stainless steel remote optical sensors with a visible red laser light source. All these sensors have the On-Target green LED Indicator.  Model ROLS-P: Remote Optical Laser Sensor with 8 ft. cable, 1/8" [3.5 mm] phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape Model ROLS-P-25: Remote Optical Laser Sensor with 25 ft. cable, 1/8" [3.5 mm] phone plug connector, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape Model ROLS-W: Remote Optical Laser Sensor with 8 ft. cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape Model ROLS24-W: Remote Optical Laser Sensor with 24 V dc input power, 8 ft. cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape Model ROLS24-W-25: Remote Optical Laser Sensor with 24 V dc input power, 25 ft. cable, 3 tinned leads, mounting bracket with jam nuts, and 12 inches of T-5 Reflective Tape Compatibility Compatibility The ROLS is a great accessory for many Monarch products! Specifications Specifications W= tinned wire leads, P= 1/8" [3.5 mm] stereo phone plug termination). MODEL ROLS-P   ROLS-W Specifications*  CE marked Speed Range 1-250,000 RPM Illumination Visible Red Laser, Class 2 (per IEC 60825-1:2014)      Classification This product complies with IEC60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50 of June 2007     Max Laser Output 1 mW max     Pulse Duration Continuous     Laser Wavelength 650nm (visible red)     Beam Divergence < 18 mrad     Beam Diameter 4 x 7 mm typical at 2 m     Laser Diode Life 8,000 operating hours MTBF (1-year warranty) On-Target Indicator Green LED on the wire end cap Operating Range Up to 25 ft. [7.6 m] and 60 degrees offset from the target Power Requirement  ROLS: 3.3 – 15 V dc, 0.4W max ROLS24-W: 24 V dc ±10%, 0.4W max NOTE: 24 V dc power input option available see ordering information. Output  ROLS: Open collector with an internal pull-up resistor to supply voltage; positive pulse when target present; Output Voltage = Supply Voltage ROLS24-W: Open collector with an internal pull-up resistor (5600 ohms) to supply voltage minus ~5V; positive pulse when a target is present Optional Outputs Available - Open Collector or TTL pulse (3.3 V dc), Negative pulse (contact factory) Operating Temp 14 °F to 158 °F (-10 °C to 70 °C) Humidity Maximum relative humidity 80% for temperature up to 88 °F (31 °C)decreasing linearly to 50% relative humidity 104 °F (40 °C) Connection 3.5 mm [1/8 inch] male stereo plug (ROLS-P); Tinned wires (ROLS-W) Material 303 stainless steel supplied with two M18 jam nuts and mounting bracket Lens Acrylic plastic Dimensions Threaded tube 3.12 in. x 0.71 in. diameter [18 x 79.4 mm] long *Specifications are subject to change without notice. Shipping Codes Shipping Codes for the ROLS Remote Optical Sensor: Harmonized Tariff Code:  9031498000 Country of Origin:  US Export Control Classification Number (ECCN):  EAR99 Downloads Literature  ROLS/ROLS24 Instruction Manual ROLS/ROLS24 Data Sheet Choosing the Right Monarch Sensor - Sensor Comparison Chart