Audio Technica AT2035PK, Streaming/Podcasting Pack
Descriptions Audio Technica AT2035PK, Streaming/Podcasting Pack The Audio Technica AT2035PK is a premium vocal microphone pac, and designed for use by streamers, podcasters and other content creators, includes AT2035 cardioid condenser microphone, ATH-M20x professional monitor headphones and an adjustable desk-mount boom arm threaded with a XLR cable. Also, Audio Technica AT2035PK has an adjustable studio boom arm clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick. The boom of the Audio Technica AT2035PK is threaded internally with an XLR cable for a clean appearance and unhindered operation. The Audio Technica AT2035PK also offer a full 360 degrees rotation and adjustable, spring-stabilized joints, the boom arm of the Audio Technica AT2035PK can repositions in quick for optimal mic placement. The rugged AT2035 side-address studio condenser microphone delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. The mic comes with an AT8458 shock mount to attenuate any noise, shock or vibration that’s transmitted through boom. Its analog XLR output connects easily to a digital converter or mixer. Product Highlights of the Audio Technica AT2035PK AT2035 Cardioid Condenser Microphone Large diaphragm for smooth, natural sound and low noise High SPL handling and wide dynamic range provide unmatched versatility Custom shock mount provides superior isolation Switchable 80 Hz high-pass filter and 10 dB pad Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source ATH-M20x Professional Monitor Headphones Advanced build quality and engineering 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils Tuned for enhanced low-frequency performance Circumaural design contours around the ears for excellent sound isolation in loud environments Convenient single-side cable exit Adjustable Studio Boom Arm Full 360° rotation Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm Internal cable management for clean desk appearance Specifications ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 20-20,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY -33 dB (22.4 mV) re 1V at 1 Pa IMPEDANCE 120 ohms MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) NOISE 12 dB SPL DYNAMIC RANGE (typical) 136 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 82 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 11-52V DC, 3.8 mA typical SWITCHES Flat, roll-off; 10 dB pad (nominal) WEIGHT 403 g (14.2 oz) DIMENSIONS 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch AUDIO-TECHNICA CASE STYLE R5