Audio Technica ATW-1101/H, ATW-1101/H

Descriptions Audio Technica ATW-1101/H, ATW-1101/H Audio Technica ATW-1101/H is a system 10 and a digital wireless headworn microphone solution for drummers, keyboards, dancers, instructors and others that use their hands during performance. The set of the Audio Technica ATW-1101/H includes the ATW-R1100 digital receiver, the ATW-T1001 UniPak pocket transmitter and the PRO 8HEcW headworn microphone. Audio Technica ATW-1101/H uses a 24-bit, 48 kHz digital audio and operates free from TV interference in the 2.4 Ghz frequency range. Additionally, the Audio Technica ATW-1101/H is built for expandability, so you can use up to eight systems simultaneously. Audio Technica ATW-1101/H Product Features Balanced XLR output and unbalanced 1/4" output on receiver allows for connection to balanced microphone level inputs or unbalanced aux level inputs on mixers and sounds systems Flexible, pivoting boom allows mic to be worn on left or right side Headband cushions for support and comfort Level controls on transmitter and receiver Pair indicator illuminates on receiver when synced with transmitter AF Peak indicator on receiver allows you to monitor the input stage on the transmitter for clipping Specifications System Specifications Operating Frequencies  2.4 GHz ISM band Dynamic Range  >109 dB (A-weighted), typical Total Harmonic Distortion  <0.05% typical Operating Range  30 m (100') typical Operating Temperature Range  0 to 40° C (32 to 104° F) Frequency Response  20 Hz to 20 kHz Audio Sampling  24 bit, 48 kHz Receiver Receiving System  Diversity (frequency/time/space) Output Connections  1x XLR, balanced 1x 1/4" (6.3 mm), unbalanced Maximum Output Level  Balanced: 0 dBV Unbalanced: +6 dBV Power Supply  100-240V AC (50/60 Hz) to 12V DC 0.5A, center positive,   switched mode external power supply Dimensions  7.48 x 1.82 x 5.06" (190.0 x 46.2 x 128.5 mm) Weight  10.2 oz (290 g) Transmitter RF Output Power  10 mW Spurious Emission  Following federal and national regulations Input Connections  1x 4-pin locking connector Wiring: Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries  2x 1.5V AA (not included) Battery Life  >7 hours (alkaline) Dimensions  2.76 x 4.21 x .98" (70.2 x 107 x 24.9 mm) Weight  3.5 oz (100 g), without batteries Microphone Element  Dynamic Polar Pattern  Hypercardioid Frequency Response  200 Hz - 18 kHz Open Circuit Sensitivity  -55 dB (1.7 mV) re 1V at 1 Pa Impedance  600 ohms Connector  Locking 4-Pin HRS connector Cable Length  55" (1.4 m) Dimensions  4.72" (120.0 mm), headset, nominal at widest point 3.17" (80.5 mm), flexible boom 0.80" (20.4 mm), microphone diameter Weight  2.1 oz (60 g)