Audio Technica ATW-1101/H92-TH, System 10 Digital Wireless
Descriptions Audio Technica ATW-1101/H92-TH, System 10 Digital Wireless The Audio Technica ATW-1101/H92-TH is a system 10 from Audio Technica and a digital wireless headworn microphone solution for lecturers and similar applications that require articulate vocal reproduction. Audio Technica ATW-1101/H92-TH set includes the ATW-R1100 digital receiver, the ATW-T1001 UniPak pocket transmitter and the beige PRO 92cW-TH headworn microphone. Audio Technica ATW-1101/H92-TH uses a 24-bit, 48 kHz digital audio and operates free from TV interference in the 2.4 Ghz frequency range. Audio Technica ATW-1101/H92-TH built for expandability so you can use up to eight systems simultaneously. Product Highlights of the Audio Technica ATW-1101/H92-TH Balanced XLR output and unbalanced 1/4" output on receiver allows for connection to balanced microphone level inputs or unbalanced aux level inputs on mixers and sounds systems Microphone designed to withstand everyday wear and tear Includes clothing clip to prevent the weight of the cable from pulling the headset Includes pouch for mic storage Level controls on transmitter and receiver Pair indicator illuminates on receiver when synced with transmitter AF Peak indicator on receiver allows you to monitor the input stage on the transmitter for clipping Specifications System Specifications Operating Frequencies 2.4 GHz ISM band Dynamic Range >109 dB (A-weighted), typical Total Harmonic Distortion <0.05% typical Operating Range 30 m (100') typical Operating Temperature Range 0 to +40° C (32 to 104° F) Frequency Response 20 Hz to 20 kHz Audio Sampling 24 bit, 48 kHz Receiver Receiving System Diversity (frequency/time/space) Output Connections 1x XLR, balanced 1x 1/4" (6.3 mm), unbalanced Maximum Output Level Balanced: 0 dBV Unbalanced: +6 dBV Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A, center positive, switched mode external power supply Dimensions 7.48 x 1.82 x 5.06" (190.0 x 46.2 x 128.5 mm) Weight 10.2 oz (290 g) Transmitter RF Output Power 10 mW Spurious Emission Following federal and national regulations Input Connections 1x 4-pin locking connector Wiring: Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries 2x 1.5V AA (not included) Battery Life >7 hours (alkaline) Dimensions 2.76 x 4.21 x .98" (70.2 x 107 x 24.9 mm) Weight 3.5 oz (100 g), without batteries Microphone Element Condenser Polar Pattern Omnidirectional Frequency Response 20 Hz - 20 kHz Open Circuit Sensitivity -45 dB (5.6 mV) re 1V at 1 Pa Maximum Input Sound Level 116 dB SPL, 1 kHz at 1% T.H.D. Signal-to-Noise Ratio 60 dB, 1 kHz at 1 Pa Current Consumption 0.3 mA typical @ 5V Voltage Range 1.5 - 9V Connector Locking 4-Pin HRS connector Cable Length 55" (1.4 m) Dimensions 0.85" (21.7 mm), microphone length 0.36" (9.2 mm), microphone diameter 4.33" (110.0 mm), boom length 0.09" (2.4mm), boom diameter Weight 0.14 oz (4.0 g), mic and boom 0.84 oz (24.0 g), mic, boom, connector and cable