Audio Technica ATW-1101/L, System 10 Digital Wireless

Descriptions Audio Technica ATW-1101/L, System 10 Digital Wireless The Audio Technica ATW-1101/L is a system 10 from Audio Technica and a digital wireless headworn microphone solution for lecturers and similar applications that require articulate vocal reproduction. Audio Technica ATW-1101/L set includes the ATW-R1100 digital receiver, the ATW-T1001 UniPak pocket transmitter and the beige PRO 92cW-TH headworn microphone. Audio Technica ATW-1101/L uses a 24-bit, 48 kHz digital audio and operates free from TV interference in the 2.4 Ghz frequency range. Audio Technica ATW-1101/L built for expandability so you can use up to eight systems simultaneously.  Product Features of the Audio Technica ATW-1101/L Balanced XLR output and unbalanced 1/4" output on receiver allows for connection to balanced microphone level inputs or unbalanced aux level inputs on mixers and sounds systems Windscreen to help prevent pops from wind and breath Microphone features a rugged build for withstanding everyday wear and tear Includes clip for securing the lavalier to your clothing Level controls on transmitter and receiver Pair indicator illuminates on receiver when synced with transmitter AF Peak indicator on receiver allows you to monitor the input stage on the transmitter for clipping Specifications System Specifications Operating Frequencies  2.4 GHz ISM band Dynamic Range  >109 dB (A-weighted), typical Total Harmonic Distortion  <0.05% typical Operating Range  30 m (100') typical Operating Temperature Range  0 to +40° C (32 to 104° F) Frequency Response  20 Hz to 20 kHz Audio Sampling  24 bit, 48 kHz Receiver Receiving System  Diversity (frequency/time/space) Output Connections  1x XLR, balanced 1x 1/4" (6.3 mm), unbalanced Maximum Output Level  Balanced: 0 dBV Unbalanced: +6 dBV Power Supply  100-240V AC (50/60 Hz) to 12V DC 0.5A, center positive,   switched mode external power supply Dimensions  7.48 x 1.82 x 5.06" (190.0 x 46.2 x 128.5 mm) Weight  10.2 oz (290 g) Transmitter RF Output Power  10 mW Spurious Emission  Following federal and national regulations Input Connections  1x 4-pin locking connector Wiring: Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V Batteries  2x 1.5V AA (not included) Battery Life  >7 hours (alkaline) Dimensions  2.76 x 4.21 x .98" (70.2 x 107 x 24.9 mm) Weight  3.5 oz (100 g), without batteries Microphone Element  Fixed-charge back plate, permanently polarized condenser Polar Pattern  Omnidirectional Frequency Response  30 Hz - 20 kHz Low Frequency Roll-Off  80 Hz, 18 dB/octave Open Circuit Sensitivity  -37 dB (14.1 mV) re 1V at 1 Pa Impedance  200 ohms Maximum Input Sound Level  135 dB SPL, 1 kHz at 1% T.H Dynamic Range  108 dB, 1 kHz at Max SPL (typical) Signal-to-Noise Ratio  67 dB, 1 kHz at 1 Pa Phantom Power Requirements  11-52V DC, 2 mA (typical) Switch  Flat, roll-off Connector  Locking 4-Pin HRS connector Cable Length  55" (1.4 m) Dimensions  0.62 x 0.33 x 0.19" (15.8 x 8.3 x 5.0 mm) Weight  0.05 oz (1.3 g)