Audio Technica ATW-1101, System 10 Digital Wireless
Descriptions Audio Technica ATW-1101, System 10 Digital Wireless The Audio Technica ATW-1101 is a system 10 from Audio -Technica, Audio Technica ATW-1101 is also a digital wireless package that includes the ATW-R1100 digital receiver and the ATW-T1001 UniPak pocket transmitter. The system of the Audio Technica ATW-1101 can be completed by adding an Audio Technica Wireless Essentials series microphone or instrument cable. The Audio Technica ATW-1101 uses 24-bit, 48 kHz digital audio and operates free from TV interference in the 2.4 GHz frequency range. The Audio Technica ATW-1101 is built for expandability, the best thing is you can use up to eight systems simultaneously. Also, the Audio Technica ATW-1101 ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity job is send the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity job is sends the signal in multiple time slots to maximize immunity to multipath interference. Lastly, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity. In addition, Audio Technica ATW-1101 features a stackable, contemporary styling, also, system 10 is available in multiple system configurations, with handheld vocal microphone/transmitters and cW-style body-pack transmitters designed for use with lavalier, instrument microphones and headworns as well as electric guitars. Each configuration of the ATW-1101 includes the ATW-R1100 receiver and either a body-pack transmitter or handheld microphone/ transmitter. The ATW-R1100 is a digital receiver offering volume control along with AF Peak and Pair indicator lights. Audio Technica ATW-1101 Product Features Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance 2.4 GHz range – completely free from TV interference Three levels of diversity assurance: frequency, time, & space Automatic frequency selection for seamless, interference-free operation Extremely easy operation with instantaneous channel selection, sync, and set-up State-of-the-art digital receiver for reliable performance Balanced XLR and unbalanced 1/4” output jacks with level control Specifications OVERALL SYSTEM SPECIFICATIONS Operating Frequencies 2.4 GHz ISM band (2400 to 2483.5 MHz) Dynamic Range >109 dB (A-weighted), typical Total Harmonic Distortion <0.05% typical Operating Range 30 m (100') typical Open range environment with no interfering signals Operating Temperature Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures Frequency Response 20 Hz to 20 kHz Depending on microphone type Maximum Simultaneous Use (Recommended) 200' minimum RECEIVER SPECIFICATIONS Receiving System Diversity (frequency/time/space) Maximum Output Level XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV Power Supply 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply Operating Temperature Range 40° F (4° C) to 110° F (43° C) Dimensions 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D Net Weight 290 grams (10.2 oz) Accessory Included Power supply BODY-PACK TRANSMITTER SPECIFICATIONS RF Power Output 10 mW Spurious Emissions Following federal and national regulations Input Connections Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V Batteries Two 1.5V AA not included Battery Life >7 hours (alkaline) Depending on battery type and use pattern Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D Net Weight 100 grams (3.5 oz) without batteries HANDHELD TRANSMITTER SPECIFICATIONS RF Power Output 10 mW Spurious Emissions Following federal and national regulations Batteries Two 1.5V AA not included Battery Life >7 hours (alkaline) Depending on battery type and use pattern Dimensions 254.8 mm (10.03") long, 50.0 mm (1.97") diameter Net Weight 280 grams (9.9 oz) without batteries Accessory Included AT8456a Quiet-Flex™ stand clamp