Audio Technica ATW-1312/L, System 10 PRO Digital Wireless

Descriptions Audio Technica ATW-1312/L, System 10 PRO Digital Wireless Audio Technica ATW-1312/L is a system 10 PRO and also a digital 24-bit/48 kHz wireless microphone system that operates on the 2.4 GHz ISM band is used to capture audio for applications such as live stage, theater, DJ setups and many more. The Audio Technica ATW-1312/L system 10 pro featured a half-rack chassis that allows you to mount one or two receiver units, however the receiver units can be released from the chassis and mounted remotely via Ethernet cable. The best thing in Audio Technica ATW-1312/L is you can linked it up to five chassis or 10 receiver units using RJ12 cable and creating a multi-channel system with up to 10 channels. The System 10 PRO Rack-Mount system of the  Audio Technica ATW-1312/L includes one ATW-RC13 receiver chassis with rack-mount adapters, two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, one RJ12 cable, one AC adapter, one ATW-T1001 bodypack transmitter, one MT830cW lavalier microphone, and one ATW-T1002 handheld dynamic microphone. In addition, Audio Technica ATW-1312/L other features include an easy-to-read display on each transmitter and receiver unit for quick setup, clear and natural-quality sound, and three levels of diversity, namely frequency, time, and space. Frequency Diversity sends the signal on two allocated frequencies, Time Diversity sends the signal in multiple time slots, and Space Diversity uses two antennas on each transmitter and receiver unit, thus to help maximize signal integrity. Audio Technica ATW-1312/L Product Features Digital 24-bit/48 kHz Operation 2.4 GHz ISM Band Automatic Frequency Selection XLR and 1/4" Outputs Digital 24-bit/48 kHz wireless operation for professional-sound quality and dependable performance Receiver units can be docked in the chassis or mounted remotely (up to 328' away) via an Ethernet cable for added versatility Up to five chassis (10 receiver units) can be linked and used simultaneously Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations Extremely easy operation with instantaneous channel selection, sync, and setup Ground-lift switch helps eliminate audible hum caused by ground loops Specifications Audio-Technica System 10 PRO ATW-RC13 Rack-Mount Digital Wireless Receiver (2.4 GHz) Overall System Operating Frequencies  2.4 GHz ISM band Dynamic Range  >109 dB (A-weighted), typical Total Harmonic Distortion (THD)  <0.05% typical Operating Range  200' (60 m) open range environment with no interfering   signals Operating Temperature Range  32 to 104°F (0 to 40°C) battery performance may be   reduced at very low temperatures Frequency Response  20 Hz to 20 kHz (depending on microphone type) Receiver Specifications Receiving System  Diversity (frequency/time/space) Output Connectors  Remote Receiver Connector: RJ45 Link Connector: RJ12 Maximum Output Level  XLR Balanced: 0 dBV 1/4" (6.3 mm) Unbalanced: +6 dBV Power Supply  100-240 VAC (50/60 Hz) to 12 VDC 0.5 A power supply   switched mode external Dimensions (W x H x D)  8.26 x 1.73 x 6.67" (209.8 x 44 x 169.3 mm) Weight  33.2 oz (940 g) Audio-Technica ATW-RU13 System 10 PRO Receiver Unit (2.4 GHz) Overall System Operating Frequencies  2.4 GHz ISM band Dynamic Range  >109 dB (A-weighted), typical Total Harmonic Distortion (THD)  <0.05% typical Operating Range  200' (60 m) open range environment with no interfering   signals Operating Temperature Range  32 to 104°F (0 to 40°C) battery performance may be   reduced at very low temperatures Frequency Response  20 Hz to 20 kHz (depending on microphone type) Audio Sampling  24-bit/ 48 kHz Latency  3.8 ms Receiver Unit Receiving System  Diversity (frequency/time/space) Remote Receiver Connector  RJ45 Mounting Thread  1/4" x 20 Dimensions (W x H x D)  2.24 x 0.75 x 3.06" (57 x 19 x 77.6 mm) Weight  2.3 oz (64 g) Audio-Technica ATW-T1001 System 10 Digital Bodypack Wireless Transmitter (2.4 GHz) General Operating Frequency  2.4 GHz ISM band Dynamic Range  > 109 dB (A-weighted), typical Total Harmonic Distortion  < 0.05% typical Operating Range  100' (30 m) typical Frequency Response  20 Hz to 20 kHz Audio Sampling  24 bit / 48 kHz RF Output Power  10 mW Spurious Emission  Following federal and national regulations Input Connections  Four-pin Locking Connector: Pin 1 - GND, Pin 2 - INST   INPUT, Pin 3 - MIC INPUT, Pin 4 - DC BIAS 9 V Battery Requirement  Two 1.5 V AA (not included) Battery Life  > 7 hours (alkaline) Operating Temperature Range  32 to 104°F (0 to 40°C) Dimensions (W x H x D)  2.76 x 4.21 x 0.98" (70.20 x 107.00 x 24.9 mm) Weight  3.5 oz (100 g) Audio-Technica ATW-T1002 System 10 Digital Wireless Hypercardioid Handheld Microphone/Transmitter (2.4 GHz) General Operating Frequency  2.4 GHz ISM band Dynamic Range  > 109 dB (A-weighted), typical Total Harmonic Distortion  < 0.05% typical Operating Range  100' (30 m) typical Frequency Response  20 Hz to 20 kHz Audio Sampling  24 bit / 48 kHz RF Output Power  10 mW Spurious Emission  Following federal and national regulations Battery Requirement  Two 1.5 V AA (not included) Battery Life  > 7 hours (alkaline) Operating Temperature  32 to 104°F (0 to 40°C) Dimensions (LxDiameter)  10.03 x 1.97" (254.8 x 50.0 mm) Weight  9.9 oz (280 g) Audio-Technica MT830cW Omnidirectional Lavalier Condenser Microphone (Black, Locking 4-Pin Hirose Connector) Analog Performance Sound Field  Mono Operating Principle  Pressure Operated Transducer  Condenser Polar Pattern  Omnidirectional Frequency Range  30 Hz to 20 kHz Signal to Noise Ratio  67 dB  Maximum SPL  135 dB SPL Impedance  200 Ohms Sensitivity  -37 dB Dynamic Range  108 dB General Output Connector  4-Pin Hirose Cable Length  4.59' / 1.4 m Operating Voltage  11 to 52 V Operating Current Consumption  2 mA Length  0.62" / 15.8 mm Diameter  0.33" / 8.3 mm Weight  0.05 oz / 1.3 g