Audio Technica ATW-3212/C710DE2, 3000 Series Wls Sys (4th gen)

Descriptions Audio Technica ATW-3212/C710DE2, 3000 Series Wls Sys (4th gen) Audio Technica ATW-3212/C710DE2 is one of the 3000 Series 4th Generation and a frequency-agile. Audio Technica ATW-3212/C710DE2 is a true diversity UHF wireless microphone system and designed to provide users the power and flexibility to operate within the congested UHF spectrum. The system of the Audio Technica ATW-3212/C710DE2 comes an an ATW-R3210 receiver, an ATW-T3202 handheld transmitter, and an ATW-C710 cardioid condenser microphone capsule, and is designed to provide intelligible, natural audio while minimizing potential interference, for stage, television, lecture, event presentation, or house of worship applications. Audio Technica ATW-3212/C710DE2  is operating in the DE2: 470.125 to 529.975 MHz band with 2395 frequencies and a range up to 328', the Audio Technica ATW-3212/C710DE2  3000 Series Fourth Generation system offers a 60 MHz tuning range, which is more than twice of that offered by the previous versions. Frequencies can be easily scanned and selected on the receiver, and then synced with the transmitter via IR sync functionality. In case of interference, the Audio Technica ATW-3212/C710DE2 multifunction button on the transmitter lets you quickly switch to a backup frequency so you can keep working with minimal interruption. Audio Technica ATW-3212/C710DE2  Product Features Fourth-generation 3000 Series wireless system gives users the power and flexibility to operate within the congested UHF spectrum Includes ATW-R3210 receiver and ATW-T3202 handheld transmitter with ATW-C710 cardioid condenser microphone capsule Wide 60 MHz UHF tuning bandwidth for maximum versatility—Band DE2: 470.125 to 529.975 MHz (2395 frequencies) Capsule with multi-stage grille design offers effective protection against plosives and smooth, natural vocal reproduction True diversity operation reduces dropouts 328' operating range Multifunction button on handheld transmitter can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered Cardioid polar pattern reduces pickup of sounds from the sides and rear, maximizing isolation from other sound sources and minimizing feedback Condenser transducer provides a 40 Hz to 20 kHz linear frequency response with a smooth, natural sound at high frequencies Handheld transmitter offers low handling noise and includes an industry-standard thread mount for use with six interchangeable A-T microphone capsules, as well as other compatible capsules Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference Frequency scan and IR sync functionality for ease of setup Dual-mode receiver display can switch between standard view or a performance view that highlights key metering Transmitter and receiver include OLED screens for optimal readout of key settings and alerts Transmitter with rugged, metal housing is powered via two AA batteries Charging terminals on transmitter work with ATW-CHG3 and ATW-CHG3N (both available separately) smart charging docks to recharge NiMH batteries (available separately) Antenna power available for powered antennas (available separately) and other in-line RF devices Ground-lift switch helps eliminate audible hum caused by ground loops XLR balanced and 1/4" unbalanced audio output jacks Specifications System Specifications Operating Frequencies  DE2: 470.125 to 529.975 MHz 2395 frequencies Frequency Step  25 kHz, minimum Modulation Mode  FM Maximum Deviation  ±38 kHz (THD: 10%) Dynamic Range  Mic Input: >115 dB (A-weighted), typical Instrument Input: >112 dB (A-weighted), typical Total Harmonic Distortion  <1.0% (at 1 kHz, ±17.5 kHz deviation) Operating Range  328' / 100 m Open range environment with no interfering signals Operating Temperature Range  23 to 113°F / -5 to 45°C Frequency Response  31 Hz to 15.50 kHz Frequency response depends on attached   microphone element Receiver Receiving System  True diversity Image Rejection  60 dB, nominal RF Sensitivity  20 dBuV at 60 dBA S/N ratio (50 Ohms termination) Antenna  Power: 12 VDC, 160 mA (combined) Input: BNC-type, 50 Ohms Maximum Output Level  XLR: +14 dBV, balanced 1/4" / 6.3 mm: +8 dBV, unbalanced Power Supply  100-240 VAC to 12 VDC, 50/60 Hz, 1 A (center positive)   switched-mode external power supply Operating Temperature Range  41 to 113°F / 5 to 45°C Dimensions (W x D x H)  8.27 x 7.52 x 1.71" / 210.0 x 191.0 x 43.4 mm Weight  38.8 oz / 1100 g, without accessories Handheld Transmitter RF Power Output  High: 30 mW Low: 10 mW (Switchable, at 50 Ohms) Spurious Emissions  Following federal and national regulations Batteries  2 x 1.5 V AA (not included) Battery Life  Alkaline High: 8.0 hours Low: 9.0 hours Ni-MH 1900 mAh High: 9.0 hours Low: 9.5 hours (Depending on battery type, usage, and environmental   conditions) Dimensions (L x D)  Without Capsule: 7.60 x 1.46" / 193 x 37 mm (maximum   diameter) With Capsule: 10.43 x 2.13" / 265 x 54 mm (maximum   diameter) Weight  Without Capsule: 7.1 oz / 200 g (without batteries) With Capsule: 11.6 oz / 330 g (without batteries) Mic Capsule Type  Interchangeable Transducer  Fixed-charge back plate permanently polarized   condenser Polar Pattern  Cardioid Frequency Response  40 Hz to 20 kHz