Audio Technica U853PMU UniLine Condenser Microphone
Description Audio Technica U853PMU UniLine Condenser Microphone The Audio Technica U853PMU is a condenser hanging microphone featuring Audio-Technica’s UniLine® line-cardioid element comes equipped with a wall/ceiling plate power module designed for permanent installation in a standard, single-gang electrical box. The phantom-powered microphone also is also offering UniGuard® innovations that are capable of enabling unsurpassed immunity from radio frequency interference. It is accepting interchangeable elements, available in UniLine®, omnidirectional, cardioid, and hypercardioid line cardioid polar patterns. Its 80 Hz low-cut UniSteep® filter is reducing pickup of low-frequency ambient noise. FEATURES Designed for suspension over choirs, instrumental groups and theater stages Wall/ceiling plate power module permits permanent installation in standard metal U.S. single gang electrical box UniLine® polar pattern provides narrow 90° acceptance angle Superior off-axis rejection for maximum gain before feedback UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI) UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality Accepts interchangeable elements to permit angle of acceptance from 90° to 360° Low-profile design with low-reflectance finish for minimum visibility POLAR PATTERN FREQUENCY RESPONSE Specifications ELEMENT Fixed-charge back plate, permanently polarized condenser POLAR PATTERN Line Cardioid FREQUENCY RESPONSE 30-20,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 18 dB/octave OPEN CIRCUIT SENSITIVITY –35 dB (17.7 mV) re 1V at 1 Pa IMPEDANCE 200 ohms MAXIMUM INPUT SOUND LEVEL 124 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical) 102 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO 72 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS 11-52V DC, 4 mA typical SWITCHES Flat, roll-off;0 dB/+10 dB gain setting WEIGHT (MICROPHONE) 1.1 oz (30 g) WEIGHT (POWER MODULE) 3.4 oz (97 g) DIMENSIONS (MICROPHONE) 6.14" (156.0 mm) long,0.48" (12.2 mm) diameter DIMENSIONS (POWER MODULE) 2.80" (71.0 mm) W x4.55" (115.5 mm) H x1.42" (36.0 mm) D OUTPUT CONNECTOR (POWER MODULE) Screw terminals CABLE 25.0' (7.6 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F-type connector OPTIONAL INTERCHANGEABLE ELEMENTS UE-C cardioid (120°);UE-H hypercardioid (100°);UE-O omnidirectional (360°) ACCESSORIES FURNISHED AT8154 two-stage foam windscreen; AT8451 steel hanger; AT8534 wall/ceiling plate power module; AT8438 5/8"-27 stand adapter AUDIO-TECHNICA CASE STYLE M32