
Audix AP42BPA, R42 Two Channel Diversity Receiver with Two B60 Bodypack Transmitters
Descriptions Audix AP42BPA, WIRELESS,R42, (2) BODY PACK ONLY, R42 Two Channel Diversity Receiver with Two B60 Bodypack Transmitters (522 MHz - 554 MHz) The Audix AP42BPA features its performance series and a dual-channel bodypack wireless system from Audix. The Audix AP42BPA has includes the R42 2-channel diversity receiver and two B60 bodypack transmitters. The R42 in Audix AP42BPA diversity receiver operates on a wide-spectrum frequency range of 522 to 554 MHz and offers one-touch auto scan searches for clear channel. The Audix AP42BPA comes in a 19" rackmount chassis an internal antenna combiner for dual antenna operation. Thanks to the one-touch sync function, this receiver is very easy to links to the B60 bodypack transmitters placed within 300' The Audix AP42BPA bodypack transmitters can be used with any lavalier, headworn or instrument microphone in the Audix line, as well as electric guitar and bass. The Audix AP42BPA bodypack transmitter has enclosed in a metal housing with modular antenna design, each transmitter comes with AF and RF gain controls and a soft mute switch which alsi serves an on/off switch when is needed. It also feature a high contrast LCD display with group, channel and battery indicator. Audix AP42BPA Product Features R42 Two Channel Diversity Receiver- 32 MHz Wide spectrum tuning receiver- 106 Pre-coordinated frequencies- One-touch auto scan searches for clear channel- One-touch sync links transmitter to receiver via infrared beamB60 Bodypack Transmitter- 64 MHz Wide spectrum transmitter- Durable metal housing- 14 Hour run time - AA batteries Specifications Audix R42 Kit-A Performance Series Dual-Channel UHF Diversity Receiver (A: 522 To 554 MHz)<span> </span>Specs Frequency Band 522 to 554 MHz Bandwidth 32 MHz # Of Simultaneous Systems Up to 8 Switchable Frequencies 106 pre-coordinated frequencies Wireless Range Up to 300' / 91 m Antenna Connector 2 x BNC (8 VDC, 150 mA) Outputs 2 x XLR 3-pin balanced 2 x 1/4" TS unbalanced Audio Output Level XLR: -12 dBV at 25 kHz deviation, 600-Ohm load, +6 gain 1/4": -18 dBV at 25 kHz deviation, 10-Ohm load, +6 gain Audio Level Control -12 to +9 dB in 3 dB steps Frequency Response 45 Hz to 18 kHz Compander 2:1 Pilot Tone 32 kHz Receiving System Single tuner, antenna diversity Signal to Noise Ratio 105 dB at 30 kHz deviation (A-weighted) Total Harmonic Distortion (THD) ≤0.7% (33 kHz deviation at 1 kHz) Sensitivity 5 dBµV (S/N 60 dB at 25 kHz deviation, A- weighted) Power Requirement 100 to 240 VAC, 50/60 Hz, 12 VDC, 1 A Dimensions (W x D x H) 16.0 x 8.2 x 1.7" / 406 x 209 x 44 mm Weight 4.8 lb / 2.2 kg Audix B60 Performance Series Bodypack Transmitter (522 To 586 MHz)<span> </span>Specs RF Power Output 10/30 mW Bandwidth 64 MHz Gain Adjustment 0 dB, -6 dB, -12 dB, -24 dB Inputs 1 x mini-XLR 3-pin Input Impedance Mic: 10 kOhms Line: 1 MOhm Maximum SPL Approximately 128 to 140 dB (depending on microphone) Battery Life Approximately 14 hours Current Consumption 110 mA typical Power Requirement 2 x AA 1.5 V batteries Dimensions (W x L x D) 2.6 x 3.5 x 0.7" / 67 x 90 x 17 mm Weight 3 oz / 85 g without batteries