Bose ControlSpace EX-1280C Conferencing Processor
Descriptions Bose Control Space EX-1280C Conferencing Processor The Bose Control Space EX-1280C Conferencing Processor features a flexible DSP platform for scalable systems, Bose Control Space EX-1280C Conferencing Processor also have the features to support rooms of various sizes and the flexibility to meet future needs. The Bose Control Space EX-1280C Conferencing Processor can offers a signal processing for integrated-microphone audio conferencing applications and it become possible because of the open-architecture, all-in-one design. Also, the Bose Control Space EX-1280C Conferencing Processor has the highest-capability processor of the ControlSpace EX family, the Bose Control Space EX-1280C Conferencing Processor includes 12 mic/line analog inputs, 8 analog outputs, 8 AmpLink digital outputs, 12 acoustic echo cancellers (AEC), and 64 x 64 Dante® connectivity. Control Space Designer software simplifies the setup process with drag-and-drop programming, miking configuration quick and easy. Bose ControlSpace EX-1280C Conferencing Processor Main Features All-in-one design supports simultaneous VoIP, PSTN and USB soft codecs in a single 1RU model 12 acoustic echo cancellers (AEC) route to both analog and Dante® inputs; multiple references allow one EX-1280C processor to support multiple rooms or AEC-sharing across multiple processors Adaptable noise cancellation on each AEC channel; non-linear processing and comfort noise to enhance the clarity and intelligibility of meetings 2-line VoIP with an internal web interface allowing IT personnel to configure VoIP parameters without design file access or integrator involvement PSTN connection (RJ-11) for worldwide POTS/analog telephone systems USB connection facilitates easy integration with PC soft codecs Dante audio networking supports 64 x 64 audio channels for connection to other Dante-enabled products, including native Dante-integrated microphones Bose AmpLink port provides 8-channels of uncompressed, low-latency digital audio to AmpLink-equipped Bose amplifiers Front-panel interface features large OLED display and rotary encoder for setting network parameters and monitoring channel activity GPIO (5 in/5 out) for external connections including microphone pushbuttons or driving microphone LEDs APPLICATIONS Performance venues Stadiums and arenas Places of worship Resorts and Hospitality Venues Multipurpose spaces Specifications INTEGRATED DSP Signal Processor/CPU 32-bit fixed/floating-point DSP 456 MHz/ARM Cortex-A8 600 MHz Maximum Calculation 3.6 GIPS / 2.7 GFLOPS Delay 43 s Audio Latency 1.05 ms (analog in to analog out, without AEC) A/D and D/A Converters 24-bit Sample Rate 48 kHz ANALOG AUDIO INPUTS Input Channels 12 balanced, mic/line level Connectors, Input 3.81 mm detachable Euroblock, 6-pin Input Impedance 12 kΩ @ 1 kHz (with or without phantom power active) Maximum Input Level +24 dBu Equivalent Input Noise -118 dB at 44 dB gain setting Phantom Power +48 VDC, 10 mA, software selectable per input Gain Settings 0 / +14 / +24 / +32 / +44 / +54 / +64 dB ANALOG AUDIO OUTPUTS Output Channels 8 balanced, line level Connectors 3.81 mm Euroblock, 6-pin Output Impedance 200 Ω Maximum Output Level +24 dBu AUDIO PERFORMANCE SPECIFICATIONS Frequency Response 20 Hz to 20 kHz (+0.3 dB/-0.1 dB) THD+N 0.002 % at +4 dBu (A-weighted/20 Hz – 20 kHz) Channel Separation (Crosstalk) < -105 dB at +4 dBu input and output level, 1 kHz Dynamic Range > 115 dB, A-weighted 20 Hz – 20 kHz, analog input to analog output ACOUSTIC ECHO CANCELLING Tail Length 480 ms Noise Reduction 32 dB Latency 50 ms References 4 AUDIO OVER IP Dante™ 64 x 64, primary/secondary, routable to AEC DIGITAL AUDIO OUTPUTS AmpLink 8 low latency (< 21 μs), 48 kHz. Requires shielded CAT 5/6 COMMUNICATION PORTS USB Device Micro-B type, stereo in/out VoIP RJ-45; 2 lines PSTN RJ-11; 1 line, Tx/Rx USB Host Type A. For future use CONTROL INPUTS Inputs (Control) 5 analog or digital inputs, 2 kΩ internal pull-up resistor to 5 V, 3.81 mm detachable Euroblock, 6-pin Analog Input Voltage Range 0 V to 3.3 V (maximum 5 V) Digital Input Voltage Range 0 V to 3.3 V (threshold voltage = 1.6 V) CONTROL OUTPUTS Outputs (Control) 5 digital outputs, 3.81 mm detachable Euroblock, 6-pin Output Voltage High: 8 V (open circuit), 2.5 V @ 10 mA Low: < 1 V @ 100 mA, push-pull INDICATORS AND CONTROLS Display 256 x 64 OLED with rotary encoder LED Status Indicators Power/Status Audio Signal Indication On Display ELECTRICAL SPECIFICATIONS Mains Voltage 85 VAC-264 VAC 50/60 Hz AC Power Consumption 35 W typical at 40 °C (104 °F) ambient Mains Connector IEC 60320-C14 (Inlet) Power Dissipation 60 W (205 BTU, 52 kcal) PHYSICAL Dimensions 44 mm x 483 mm x 282 mm (1.7” x 19” x 11.1”) Net Weight 3.6 kg (7.3 lb) Operating Temperature 0°C - 40°C (32°F - 104°F) Cooling System 2 variable-speed fans, side venting GENERAL PC Configuration Software ControlSpace Designer™ software version 5.0 or later Network Control Ethernet (RJ-45), 1 Gbps RS-232/485 ports RS-232 (DTE) and Bose CC-16 (RS-485 master) 3.81 mm detachable Euroblock, 3-pin Audio Channel Capacity 166 channels (20 analog, 8 AmpLink out, 64 x 64 Dante, 4 VoIP, 4 USB, 2 PSTN) COMPLIANCE Safety UL60065 (8th edition), CAN/CSA-C22.2 No.60065 (8th edition), IEC/EN60065 (8th edition) EMC EN 55032:2015, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55103-2:2009 FCC Part 15B Class A, ICES-003 Class A, CNS13439, GB13837, GB17625.1, GB17625.2 25.2, CISPR13 Telephone: Country Standard EU ETSI ES 203 021-1 V2.1.1 (2005-08), 203 021-2 V2.1.2 (2006-01), 203 021-3 V2.1.2 (2006-01) Japan JATE, ORDINANCE CONCERNIG TERMINAL FACILITES ETC., MIC Notices NO. 99 HK HKTA 2011 ISSUE 6 MAY 2010 Australia AS/ACIF S002: 2010+AMANDMENT 2012 NO.1(only reports) Taiwan NCC: PSTN01, EMI CNS13438, Safety: CNS14336 New Zealand PTC200-May 2006, PTC220-May 2008 UAE TRA India TEC: TEC-IR-TX-PST-01-02-MAR-15 USA FCC Part 68 Canada CS-03 Part I, Issue 9, Amendment 5, March 2016 China CCC: GB/T9254-2008;GB9254-1998;GB9254-2008;GB4943.1-2011;YD/T993-1998; Mexico NOM-196-SCFI-2016 (IFT-004-2016)