BSS BLU-100, 12 analog mic/line input, 8 analog output, networked signal processor w/ BLU link

Descriptions BSS BLU-100, 12 analog mic/line input, 8 analog output, networked signal processor w/ BLU link The Soundweb London BSS BLU-100 offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a high bandwidth, fault tolerant digital audio bus. The BSS BLU-100 has open architecture which is fully configurable through HiQnet™ London Architect. The BSS BLU-100 features a rich palette of processing and logic objects and a "drag and drop" method of configuration provide a simple and familiar design environment. This BSS BLU-100 processor features a low latency, fault tolerant digital audio bus of 4 channels which ises standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber medi converters can be used to increase the distance between devices to over 40km. The BSS BLU-100 is also compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices. Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect. 12 Control Inputs and 6 Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect. The BLU-100 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution. BSS BLU-100 Main Features 12 Analog Inputs (with 48v Phantom Power per Channel) 8 Analog Outputs Configurable Signal Processing Rich Palette of Processing and Logic Objects 48 Channel, Low Latency, Fault Tolerant Digital Audio Bus Clear Front Panel LED Indication Bi-Directional Locate Functionality 12 Control Inputs and 6 Logic Outputs for GPIO Integration Soundweb London Interface Kit for Third Party Control System Integration (Documentation) HiQnet Device Configuration, Control and Monitoring from HiQnet London Architect Specifications Indicators Input  Signal Present, CLIP, 48 V (Input only) Other  COM, STAT, ERR, PWR Analog Input Mic/Line Inputs  12x electronically balanced on Phoenix Combicon removable   screw connectors Nominal gain 0dB, electronically switchable up to +48dB,in   +6dB steps Input Impedance  3.5 kOhms Maximum Input Level  +20 dBu with 0 dB input gain,+8 dBu with 12 dB gain CMRR  >75 dB at 1 kHz EIN  <-128 dBu typical with 150 ohm source Phantom Power  48 V nominal, selectable per input Latency  A/D Latency: 37/Fs [0.77 ms@ 48 kHz] Analog Outputs Outputs  8x electronically balanced on Phoenix/Combicon removable   screw connectors Maximum Output Level  +19 dBu Frequency Response  20 Hz to 20 kHz (+0.5 dB/-1 dB) THD  <0.01% 20 Hz to 20 kHz, +10 dBu output Dynamic Range  108 dB typical, 22 Hz to 22 kHz, unweighted Crosstalk  <-75 dB Output Impedance  40 ohms balanced and 20 ohms unbalanced Latency  D/A Latency: 29/Fs [0.60 ms@48 kHz] Control Port Control Ports  12 inputs and 6 outputs Input Voltage  0 to 4.5 V Input Impedance  2-Wire Mode: 4.7 kOhm to +5 V 3-Wire Mode: >1 Mohm Output Voltage  Logic Output Voltage: 0 or +5 V unloaded Output Impedance  Logic Output Impedance: 440 ohms Output Current  Logic Output Current: 10 mA source, 60 mA sink Watchdog Output Output Current  Opto Output Current: 14 mA maximum Voltage  Withstanding Voltage: 80 V maximum (Off) Impedance  Series Impedance: 220 ohms (isolated) Control Network Connectors  RJ45 Ethernet connector Maximum Cable Length  300' (100 m) on Cat5e cable between devices Number of Maximum Nodes  60 Latency  11/Fs [0.23 ms @48 kHz] Pass Through Latency: 4/Fs [0.08 ms @48 kHz] Power Mains Voltage  100-240 V AC, 50/60 Hz Power Consumption  <55 VA BTU  <188 BTU/hour Operating Temperature Range  41 to 95°F (5 to 35°C) Dimensions & Weight Dimensions (HxWxD)  1.75 x 19.00 x 9.00" (45 x 483 x 229 mm) Weight  6.4 lb (2.9 kg)