Crown DCi 4|1250DA Dante-enabled amplifier with DSP, network control/monitoring
Description Crown DCi 4|1250DA Dante-enabled amplifier with DSP, network control/monitoring, GPIO, 2/4/8Ω and 70/100V operation. 4 channels, 1250W/ch The Crown DCi 4|1250DA is one of the Crown DriveCore Install DA Series. It is a Four-channel, 1250W @ 4Ω Power Amplifier with Dante™ / AES67 Networked Audio, and 70V/100V. For applications requiring Dante or AES67 networked audio it is the perfect unit to use. It is designed for providing a balance combination of channel count, output power and speaker load flexibility that works alongside with proprietary DriveCore® technology for maximum efficiency and admirable audio quality. The DCi DA Series comes with network control/monitoring, a high-powered DSP with JBL speaker tunings and the ability to drive 70V and 100V, 2/4/8/16 ohm speaker loads. The Crown DCi 4|1250DA amplifier is perfect for installations, that have standardized on Dante for networked audio transport, because of its advanced capabilities and support for Dante Domain Manager. Features INTEGRATED DANTE™ / AES67 NETWORKED AUDIO – Simplifies installation by enabling Dante / AES67 networked audio signals to be sent directly to the amplifier. Provides flexibility of installation options available with our expansive line-up of DriveCore Install amplifiers. NETWORK CONFIGURATION, MONITORING & CONTROL – Better monitoring, control and audio manipulation with the HiQnet™ protocol over standard TCP/IP network. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers. PROGRAMMABLE GENERAL PURPOSE INPUT/OUTPUT PORT – GPIO ports can be configured in many different ways, such as volume controls, recall presets, or to report errors to third-party control system. DIGITAL SIGNAL PROCESSING – DSP capabilities include the following:LevelMAX LimitersInput/Output EQCrossoverDelayMatrix RouterSpeaker Line Monitoring Specifications - Redundant, independent Dante / AES67 ports Primary & Secondary Will accept 48khz or 96khz Capable of sending out Dante / AES67 audio from analog inputs pre/post processing (@ 48kHz) - Audio Architect Control and Monitoring - DriveCore Amplifier Technology - Universal PFC Power Supply - DSP 48kHz processing 20 Presets Input router - High, medium, and low priority inputs Input delay up to 2s Input EQ Crossover Output EQ Output Delay up to 100ms LevelMAX limiter Load Monitoring - Pilot tone Normal Burst - Continuous Load Monitoring - Sweep Load Monitoring - Aux-Port Sleep contact closure Amp Status output - Removable air filters - Front panel LED indicators - AES67 Compatible - Sweep Load Monitoring Channel Auto-Standby Speaker Tunings - Aux-Port Sleep contact closure Amp Status output - Removable air filters - Front panel LED indicators - AES67 Compatible