Dynacord DC-CMS2200-3-MIG, Powered Mixer 18 Mic/Line + 4 Mic/Stereo Line Channels

Dynacord DC-CMS2200-3-MIG, Powered Mixer 18 Mic/Line + 4 Mic/Stereo Line Channels The CMS III 22-Channel Power Mixer from Dynacord features 18 mics/line and four mic/stereo-line channels. There are six auxiliary ports, two with pre, two with the post, and two with pre/post switchable faders. Two effects processors offer 100 factory presets and a TAP key allows precise setting of delay times. Each preset can be edited and stored to 20 user memories. The built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows integration of instruments such as keyboards. The 11-band stereo graphic equalizer can be routed to master or monitor channels. Dynacord DC-CMS2200-3-MIG Main Features 18 x Mic/Line Channels 4 x Mic/Stereo Line Channels 6 x AUX Channels Dual 24-Bit Stereo Effects USB Audio Interface 11-Band Stereo Graphic Equalizer Specification Channels 18 x Mic/Line4 x Mic/Stereo Line Auxiliary 2 x Pre (MON)2 x Post (FX)2 x Pre/Post Switchable (AUX) Gain Microphone (Mono/Stereo): 0 to 60 dB / 10 to 60 dBLine/CD/USB (Stereo): -10 to 20 dB Maximum THD @ 1kHz Microphone Input to Master A L/R Outputs, +16 dBu, Typical: < 0.005%Frequency Response, -3 dB, ref. 1 kHz, any input to any Mixer Output: 15 Hz to 70 kHz Crosstalk @ 1 kHz Fader and FX/AUX/MON-Send Attenuation: > 85 dBChannel-to-Channel: < -80 dBCMRR, Microphone Input:> 80 dBInput Sensitivity (All Level Controls in Max. Position Microphone / Line, Mono / Line, Stereo / CD, Stereo): -74 dBu (155 µV) / -54 dBu (1.55 mV) / -34 dBu (15.5 mV) / -34 dBu (15.5 mV) Maximum Level Microphone Inputs: 21 dBuMono Line Inputs / Stereo Line Inputs: 41 dBu / 30 dBuAll Other Inputs: 22 dBuAll Other Outputs: 22 dBu Input Impedances Microphone / Insert Return: 2 Kilohms / > 3.3 Kilohms2-Track Return and CD Input: 10 KilohmsAll Other Inputs: > 15 Kilohms Output Impedances Headphones: 47 OhmsAll Other Outputs: 75 Ohms Equivalent Input Noise Microphone Input, A-Weighted, 150 Ohms, -130 dBuNoise, Channel Inputs to Master A L/R Outputs, A-WeightedMaster Fader Down: -97 dBuMaster Fader 0 dB, Channel Fader Down: -87 dBuMaster Fader 0 dB, Channel Fader 0 dB, Channel Gain Unity: -81 dBu Equalization LO Shelving: ± 15 dB / 60 HzMID Peaking, Mono Inputs: ± 15 dB / 100 Hz to 8 kHzMID Peaking, Stereo Inputs: ± 12 dB / 2.4 kHzHI Shelving: ± 15 dB / 12 kHzMaster EQ 11-Band (63, 125, 250, 400, 630, 1 kHz, 1.6 kHz, 2.5 kHz, 4 kHz, 6.3 kHz, 12 kHz): ± 10 dB / Q = 1.5 to 2.5 Power Consumption 55 W without Lamp, 60 W with Lamp Filter LO-CUT, Mono Inputs: f = 80 Hz, 18 dB/oct.Voice Filter, Mono Inputs: SwitchableFeedback Filter, MON 1/2: 70 Hz to 7 kHz, Notch, -9 dB Effects Type, Effects Presets: Dual Stereo 24/48-Bit Multi-Effects Processors, 100 Factory + 20 User, Tap-Delay,Remote Control Footswitch, MIDIDisplay: 128 x 64 pixels, OLED Digital Audio Channels: 4 Inputs / 4 OutputsAD/DA Conversion, Sampling Rate 24-Bit, 44.1 / 48 / 88.2 / 96 kHzPC Interface: USB 2.0, Female Type-BMIDI Interface: 5-Pin DIN Connector, Input / Output Mixer Output Connections MON 1, MON 2, Master A (Relay Controlled) Power Supply Switching Mode µC Controlled: Mains Over/Undervoltage, High Temperature Phantom Power 48 VDC (Switchable in Groups) Power Requirements 100 to 240 VAC, 50/60 Hz (SMPS with Auto Range Mains Input) Safety Class Not Specified by Manufacturer Ambient Temperature Not Specified by Manufacturer Dimensions 32.2 x 6.1 x 19.6" / 818.5 x 155 x 498.5 mm Weight 32.0 lb / 14.5 kg