Dynacord DC-CMS600-3-MIG, CMS III 8-Channel Power Mixer

Dynacord DC-CMS600-3-MIG, CMS III 8-Channel Power Mixer The CMS III 8-Channel Power Mixer from Dynacord features four mic/line, two mic/stereo-line, and two stereo line channels. There are two auxiliary ports, one with pre and one with pre/post switchable faders. Two effects processors offer 100 factory presets and a TAP key allows precise setting of delay times. Each preset can be edited and stored to 20 user memories. The built-in USB audio interface shares four playback and four recording channels simultaneously with a PC, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows integration of instruments such as keyboards. The 9-band stereo graphic equalizer can be routed to master or monitor channels. Dynacord DC-CMS600-3-MIG Main Features 4 x Mic/Line Channels 2 x Mic/Stereo Line Channels 2 x Stereo Line Channels 2 x AUX Channels Dual 24-Bit Stereo Effects USB Audio Interface 9-Band Stereo Graphic Equalizer Specification Channels 4 x Mic/Line2 x Mic/Stereo Line2 x Stereo Line Auxiliary 1 x Pre (MON)1 x Pre/Post Switchable (AUX) Gain Microphone (Line -20 dB): 10 to 60 dBTrim Line/CD (Stereo): -10 to 20 dB Maximum THD @ 1kHz Microphone Input to Master A L/R Outputs, +16 dBu, Typical: < 0.005%Frequency Response, -3 dB, ref. 1 kHz, any input to any Mixer Output: 15 Hz to 70 kHz Crosstalk @ 1 kHz Fader and FX/AUX/MON-Send Attenuation: > 85 dBChannel-to-Channel: < -80 dBMute and Standby Switch Attenuation: > 100 dBCMRR, Microphone Input:> 80 dBInput Sensitivity (All Level Controls in Max. Position Microphone / Line, Mono / Line, Stereo / CD, Stereo): -74 dBu (155 µV) / -54 dBu (1.55 mV) / -34 dBu (15.5 mV) / -34 dBu (15.5 mV) Maximum Level Microphone Inputs: 12 dBuMono Line Inputs / Stereo Line Inputs: 31 dBu / 30 dBuAll Other Inputs: 22 dBuAll Other Outputs: 22 dBu Input Impedances Microphone / Insert Return: 2 Kilohms / > 3.3 Kilohms2-Track Return and CD Input: 10 KilohmsAll Other Inputs: > 15 Kilohms Output Impedances Headphones: 47 OhmsAll Other Outputs: 75 Ohms (Unbalanced), 150 Ohms (Balanced) Equivalent Input Noise Microphone Input, A-Weighted, 150 Ohms, -130 dBuNoise, Channel Inputs to Master A L/R Outputs, A-WeightedMaster Fader Down: -100 dBuMaster Fader 0 dB, Channel Fader Down: -92 dBuMaster Fader 0 dB, Channel Fader 0 dB, Channel Gain Unity: -82 dBu Equalization LO Shelving: ± 15 dB / 60 HzMID Peaking: ± 12 dB / 2.4 kHzHI Shelving: ± 15 dB / 12 kHzMaster EQ 9-Band (63, 125, 250, 500, 1 kHz, 2 kHz, 4 kHz, 6.3 kHz, 12 kHz): ± 10 dB / Q = 1.5 to 2.5 Power Consumption At 1/8 Maximum Output Power, 4 Ohms: 35 W Filter LO-CUT, Mono Inputs: f = 80 Hz, 18 dB/oct. Effects Type, Effects Presets: Dual Stereo 24/48-Bit Multi-Effects Processors, 100 Factory + 20 User, Tap-Delay,Remote Control Footswitch, MIDIDisplay: 128 x 64 pixels, OLED Digital Audio Channels: 4 Inputs / 4 OutputsAD/DA Conversion, Sampling Rate 24-Bit, 44.1 / 48 / 88.2 / 96 kHzPC Interface: USB 2.0, Female Type-BMIDI Interface: 5-Pin DIN Connector, Input / Output Mixer Output Connections AUX, MON, Master A L/R (Relay Controlled) Power Supply Switching Mode µC Controlled: Mains Over/Undervoltage Phantom Power 48 VDC (Switchable) Power Requirements 100 to 240 VAC, 50/60 Hz (SMPS with Auto Range Mains Input) Safety Class I Ambient Temperature 40 to 105°F / 5 to 40°C Dimensions 16.4 x 4.3 x 13.7" / 416.9 x 108.6 x 347.8 mmRackmount (7.5 HE): 19 x 3.9 x 13.1" / 483 x 99.1 x 332.6 mm Weight 12.8 lb / 5.8 kg