Dynacord DC-PM1600-3-UNIV, PowerMate3 16-Channel Powered Mixer

Dynacord DC-PM1600-3-UNIV, PowerMate3 16-Channel Powered Mixer The PowerMate3 16-Channel Powered Mixer from Dynacord features 12 mics/line and four mic/stereo-line channels. It also has six auxiliary ports, two of them switchable pre/post fader. Two effects processors offer 100 factory presets, including the already legendary PowerMate reverbs. Each preset can be edited and stored to 20 user memories. A built-in USB audio interface shares four playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit, 96 kHz. An additional MIDI interface allows integration of instruments such as keyboards. The 11-band stereo graphic equalizer can be routed to master or monitor channels. The amplifier features 2 x 1000W at 4 Ohms (RMS). Dynacord DC-PM1600-3-UNIV Main Features 2 x 1000W Built-In Class-D Amplifiers 12 x Mic/Line Channels 4 x Mic/Stereo Line Channels 6 x AUX Channels Dual 24-Bit Stereo Effects USB Audio Interface 11-Band Stereo Graphic Equalizer Steinberg Cubase software Efficient and lightweight with modern switching mode power supply technology and a class‑D output stage Slim housing protected by a rugged plastic lid with an integrated handle for easy transportation Optional speaker protection allows a limitation of long-term power without giving up dynamics Made in Germany Specification Channels 12 x Mic/Line4 x Mic/Stereo Line Auxiliary 2 x Pre2 x Post2 x Pre/Post Switchable Output Power Max Single Channel, Dynamic-Headroom, IHF-A:Into 2.66 Ohms: 2 x 1600 WInto 4 Ohms: 2 x 1250 WInto 8 Ohms: 2 x 675 WMax Single Channel, Continuous, 1 kHz, THD = 1%:Into 2.66 Ohms: 2 x 1350 WInto 4 Ohms: 2 x 1150 WInto 8 Ohms: 2 x 650 WMax Midband, 1 kHz, THD = 1%, Dual Channel:Into 2.66 Ohms: 2 x 1350 WInto 4 Ohms: 2 x 1000 WInto 8 Ohms: 2 x 600 WRated, 20 Hz to 20 kHz, THD < 0.5%, Single Channel:Into 4 Ohms: 2 x 900 WInto 8 Ohms: 2 x 450 W Maximum Output Voltage Power Amplifier, 1 kHz, No Load: 74 V rms Maximum THD @ 1kHz MBW = 80 kHz:MIC Input to Master A L/R Outputs, +16 dBu, Typical: < 0.005%Power AMP Inputs to Speaker L/R Outputs: < 0.075% DIM 30 Power Amplifier, 3.15 kHz, 15 kHz: < 0.05% IMD SMPTE Power Amplifier, 60 Hz, 7 kHz: < 0.15% Frequency Response -3 dB, ref. 1 kHz:Any Input to Any Mixer Output: 15 Hz to 70 kHzAny Input to Speaker L/R Output: 20 Hz to 30 kHz Crosstalk @ 1 kHz Amplifier L/R: < -85 dBChannel to Channel: < -80 dBMute- and Standby-Switch Attenuation: > 100 dBFader and FX/AUX/MON-Send Attenuation: > 85 dB CMRR MIC Input, 1 kHz: > 80 dB Input Sensitivity All Level Controls in Max Position:Microphone: -74 dBu (155 µV)Line (Mono): -54 dBu (1.55 mV)Line (Stereo): -34 dBu (15.5 mV)CD (Stereo): -34 dBu (15.5 mV)Power AMP Inputs: +8 dBu (1.95 V) Maximum Level Mixing Desk:Microphone Inputs: 21 dBuMono Line Inputs: 41 dBuStereo Line Inputs: 30 dBuAll Other Inputs: 22 dBuAll Other Outputs: 22 dBu Input Impedances Microphone: 2 KilohmsInsert Return: 3.3 Kilohms2-Track Return & CD Input: 10 KilohmsAll Other Inputs: > 15 Kilohms Output Impedances Phones: 47 OhmsAll Other Outputs: 75 Ohms Equivalent Input Noise Microphone Input, A-Weighted, 150 Ohms: -130 dBu Noise Channel Inputs to Master A L/R Outputs, A-Weighted:Master Fader Down: -97 dBuMaster Fader 0 dB, Channel Fader Down: -89 dBuMaster Fader 0 dB, Channel Fader 0 dB, Channel Gain Unity: -82 dBu Signal / Noise Power Amplifier, A-Weighted, 4 Ohms: 105 dB Output Stage Amplifier: Class-D Equalization LO Shelving: ±15 dB / 60 HzMID Peaking, Mono Inputs: ±15 dB / 100 Hz to 8 kHzMID Peaking, Stereo Inputs: ±12 dB / 2.4 kHzHI Shelving: ±15 dB / 12 kHzMaster EQ 11-Band (63 Hz, 125 Hz, 250 Hz, 400 Hz, 630 Hz, 1 kHz, 1.6 kHz, 2.5 kHz, 4 kHz, 6.3 kHz, 12 kHz): ±10 dB / Q = 1.5 to 2.5 Filter LO-CUT, Mono Inputs: f = 80 Hz, 18 dB/oct.Voice Filter, Mono Inputs: SwitchableFeedback Filter, MON 1/2: 70 Hz to 7 kHz, Notch, -9 dBSpeaker Processing: LPN, Switchable Effects Type: Dual Stereo 24/48-Bit Multi-Effects ProcessorsEffects Presets: 100 Factory + 20 User, Tap-DelayRemote Control: Footswitch, MIDI Display 128 x 64 pixels, OLED Digital Audio Channels: 4 x Inputs / 4 x OutputsAD/DA Conversion: 24-BitSampling Rate: 44.1 / 48 / 88.2 / 96 kHzPC Interface: USB 2.0, Female Type-BPeak Display: 6 dB Before Clip MIDI Connectors 1 x 5-Pin DIN, Input / Output Power Control Output: Adjustable Longterm RMS Limiter Protection Mixer Outputs (Relay Controlled): MON 1, MON 2, MASTER AAmplifier: Audio Limiters, High Temperature, DC, HF, Short Circuit, Peak Current Limiters, Turn-On Delay, Back EMFSwitching Mode Power Supply (µC controlled): Inrush Current Limiters, Mains Over/Undervoltage, Mains Overcurrent, High Temperature Cooling Continuous Speed-Controlled Fans Phantom Power Switchable In Groups: 48 VDC Power Requirements SMPS with Auto Range Mains Input: 100 to 240 VAC, 50/60 Hz Power Consumption At 1/8 Maximum Output Power, 4 Ohms: 450 W Safety Class I Ambient Temperature 40 to 105°F / 5 to 40°C Dimensions 26.1 x 6.5 x 22.5" / 663.5 x 164.5 x 571.5 mm (with Lid) Weight 33.1 lb / 15 kg (without Lid)37.5 lb / 17 kg (with Lid)